Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Gr-Fe Intake Exhaust. Land Cruiser. Urj200, 202 Grj200 Vdj200
Exhaust Pipe -- Removal |
- CAUTION:
- Wear protective gloves when removing the exhaust pipe.
- The exhaust pipe is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe has cooled down before removing it.
| 1. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) |
Disconnect the sensor connector.
 |
Using SST, remove the sensor.
- SST
- 09224-00010
 |
| 2. REMOVE TAILPIPE ASSEMBLY |
Remove the bolt, clamp and gasket.
Remove the tailpipe from the 2 exhaust pipe supports.
| 3. REMOVE CENTER EXHAUST PIPE ASSEMBLY |
Remove the 4 bolts and 2 compression springs.
Remove the center exhaust pipe from the 3 exhaust pipe supports.
Remove the 2 gaskets from the front exhaust pipe and front No. 2 exhaust pipe.
| 4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
Disconnect the heated oxygen sensor connector.
Remove the 2 nuts and front exhaust pipe.
Remove the gasket from the front exhaust pipe.
| 5. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) |
Using SST, remove the sensor.
- SST
- 09224-00010
 |
| 6. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Disconnect the heated oxygen sensor connector.
Remove the 2 nuts and front exhaust pipe.
Remove the gasket from the front exhaust pipe.