Exhaust Pipe -- Removal |
- CAUTION:
- Wear protective gloves when removing the exhaust pipe.
- The exhaust pipe is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe has cooled down before removing it.
| 1. REMOVE NO. 2 ENGINE UNDER COVER |
Remove the 2 bolts and No. 2 engine under cover.
 |
| 2. REMOVE TAILPIPE ASSEMBLY |
Remove the bolt, clamp and gasket.
Remove the tailpipe from the 2 exhaust pipe supports.
Remove the bolt and clamp, and then disconnect the tailpipe from the center exhaust pipe.
| 3. REMOVE EXHAUST PIPE DAMPER |
Remove the 2 bolts and exhaust pipe damper from the tailpipe.
 |
| 4. REMOVE CENTER EXHAUST PIPE ASSEMBLY |
Remove the 4 bolts.
Remove the center exhaust pipe from the 3 exhaust pipe supports.
Remove the 2 gaskets from the front exhaust pipe and front No. 2 exhaust pipe.
| 5. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
Disconnect the heated oxygen sensor connector.
Remove the bolt and disconnect the wire harness clamp bracket of the oxygen sensor from the transmission.
Remove the 2 nuts, front No. 2 exhaust pipe and gasket from the exhaust manifold LH.
| 6. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Disconnect the heated oxygen sensor connector.
Remove the bolt and disconnect the wire harness clamp bracket of the oxygen sensor from the transmission.
Remove the 2 nuts, front exhaust pipe and gasket from the exhaust manifold RH.
| 7. REMOVE NO. 2 HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) |
Using SST, remove the sensor.
- SST
- 09224-00010
| 8. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) |
Using SST, remove the sensor.
- SST
- 09224-00010
 |