Accelerator Pedal On-Vehicle Inspection

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Engine Control. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

Accelerator Pedal -- On-Vehicle Inspection



1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

  1. Connect the GTS to the DLC3.

  1. Turn the engine switch on (IG).

  1. Turn the GTS on.

  1. Enter the following menus: Powertrain / Engine and ECT/ Data List / Primary / Accel Sens. No.1 Volt % and Accel Sens. No.2 Volt %.

  1. Read the value displayed on the tester.

    Standard Value:
    Tester Display
    		Condition
    		Specified Condition
    Accel Sens. No.1 Volt %
    		Released
    		10 to 22%
    Depressed
    		52 to 90%
    Accel Sens. No.2 Volt %
    		Released
    		24 to 40%
    Depressed
    		68 to 99%
    If the result is not as specified, check the accelerator pedal, wire harness or ECM.