Audio And Visual System (W/ Multi-Display) Data Signal Circuit Between Radio Receiver And Stereo Jack Adapter

Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)

AUDIO AND VISUAL SYSTEM (w/ Multi-display) - Data Signal Circuit between Radio Receiver and Stereo Jack Adapter


DESCRIPTION

The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the multi-media module receiver assembly via this circuit.

WIRING DIAGRAM


Land Cruiser. Urj200, 202 Grj200 Vdj200.Audio Video.Audio And Visual System (For Radio Receiver Type).Audio And Visual System (W/ Multi-Display) Data Signal Circuit Between Radio Receiver And Stereo Jack Adapter


INSPECTION PROCEDURE

1.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)

  1. Disconnect the z1 multi-media module receiver assembly connector.

  1. Disconnect the t1 No. 1 stereo jack adapter assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    z1-2 (US1-) - t1-2 (US1-)
    		Always
    		Below 1 Ω
    z1-3 (US1+) - t1-3 (US1+)
    		Always
    		Below 1 Ω
    z1-2 (US1-) or t1-2 (US1) - Body ground
    		Always
    		10 kΩ or higher
    z1-3 (US1+) or t1-3 (US1+) - Body ground
    		Always
    		10 kΩ or higher
    z1-5 (USG1) - Body ground
    		Always
    		10 kΩ or higher


NG
REPAIR OR REPLACE HARNESS OR CONNECTOR
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)