Audio Visual Telematics. Land Cruiser. Urj200, 202 Grj200 Vdj200
Audio Video. Land Cruiser. Urj200, 202 Grj200 Vdj200
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
AUDIO AND VISUAL SYSTEM (w/o Navigation System) - Sound Signal Circuit between Radio Receiver and Stereo Jack Adapter |
DESCRIPTION
The No. 1 stereo jack adapter assembly sends sound signal from an external device to the radio receiver assembly through this circuit.The sound signal that has been sent is amplified by the stereo component amplifier assembly or radio receiver assembly, and then is sent to the speakers.
If there is an open or short in the circuit, sound cannot be heard from the speakers even if there is no malfunction in the stereo component amplifier assembly, radio receiver assembly or speakers.
WIRING DIAGRAM
INSPECTION PROCEDURE
| 1.CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) |
Disconnect the m1 No. 1 stereo jack adapter assembly and F19 radio receiver assembly connectors.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition m1-8 (AUXO) - F19-19 (AUXI) Always Below 1 Ω m1-7 (ASGN) - F19-16 (ASGN) Always Below 1 Ω m1-5 (ARO) - F19-15 (ARI) Always Below 1 Ω m1-6 (ALO) - F19-17 (ALI) Always Below 1 Ω m1-9 (AGND) - F19-18 (AGND) Always Below 1 Ω m1-8 (AUXO) - Body ground Always 10 kΩ or higher m1-7 (ASGN) - Body ground Always 10 kΩ or higher m1-5 (ARO) - Body ground Always 10 kΩ or higher m1-6 (ALO) - Body ground Always 10 kΩ or higher m1-9 (AGND) - Body ground Always 10 kΩ or higher
|
| ||||
| OK | ||
| ||