Theft Deterrent System (W/ Entry And Start System) Data List / Active Test

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DATA LIST

  1. ACTIVE TEST

Theft Deterrent System (W/ Entry And Start System) -- Data List / Active Test



DATA LIST
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Main Body / Data List.

  5. According to the display on the GTS, read the Data List.

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    ACC SW
    		Engine switch / ON or OFF
    		ON: Engine switch on (ACC)
    OFF: Engine switch off
    		"ON" is also displayed for this item when the engine switch is on (IG).
    IG SW
    		Engine switch / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off or on (ACC)
    		"OFF" is also displayed for this item when the engine switch is on (ACC).
    RR Door Courtesy SW
    		Rear door courtesy light switch RH / ON or OFF
    		ON: Rear door RH open
    OFF: Rear door RH closed
    		-
    RL Door Courtesy SW
    		Rear door courtesy light switch LH / ON or OFF
    		ON: Rear door LH open
    OFF: Rear door LH closed
    		-
    Back Door Courtesy SW
    		Back door courtesy light switch / ON or OFF
    		ON: Back door open
    OFF: Back door closed
    		-
    FR Door Lock Pos
    		Front door RH unlock detection switch / LOCK or UNLOCK
    		LOCK: Front door RH locked
    UNLOCK: Front door RH unlocked
    		-
    FR Door Courtesy SW
    		Front door courtesy light switch RH / ON or OFF
    		ON: Front door RH closed
    OFF: Front door RH open
    		-
    FL Door Lock Pos
    		Front door LH unlock detection switch / LOCK or UNLOCK
    		LOCK: Front door LH locked
    UNLOCK: Front door LH unlocked
    		-
    FL Door Courtesy SW
    		Front door courtesy light switch LH / ON or OFF
    		ON: Front door LH closed
    OFF: Front door LH open
    		-
    Hood Courtesy SW
    		Engine hood courtesy switch / ON or OFF
    		ON: Engine hood closed
    OFF: Engine hood open
    		-
    RR-Door Lock Pos SW
    		Rear door RH unlock detection switch / ON or OFF
    		ON: Rear door RH or LH unlocked
    OFF: Rear door RH and LH locked
    		-
    RL-Door Lock Pos SW
    		Rear door LH unlock detection switch / ON or OFF
    		ON: Rear door LH or RH unlocked
    OFF: Rear door LH and RH locked
    		-
    Intrusion Sens OFF SW*1
    		Intrusion sensor cancel switch / ON or OFF
    		ON: Intrusion sensor cancel switch on
    OFF: Intrusion sensor cancel switch off
    		-
    Glass Break Sensor Detection*5
    		Glass breakage sensor detection / ON or OFF
    		ON: Glass breakage sensor detected
    OFF: Glass breakage sensor not detected
    		-
    Intrusion Sensor*1
    		Status of the intrusion sensor detection / ON or OFF
    		ON: Intrusion sensor detected
    OFF: Intrusion sensor not detected
    		-
    Tilt Sensor*1
    		Status of the tilt sensor detection / ON or OFF
    		ON: Tilt sensor detected
    OFF: Tilt sensor not detected
    		-
    Intrusion Sen Conn*1
    		Intrusion sensor connecting / ON or OFF
    		ON: Intrusion sensor connected
    OFF: Intrusion sensor not connected
    		-
    Tilt Sensor Connect*1
    		Tilt sensor connecting / ON or OFF
    		ON: Tilt sensor connected
    OFF: Tilt sensor not connected
    		-
    Sealed Glas Brak Sen*5
    		Glass breakage sensor connecting / With or Without
    		With: Glass breakage sensor connected
    Without: Glass breakage sensor not connected
    		-
    Intrusion Sensor Sound Detect*1, *3, *7
    		Sound detection status of the intrusion sensor (theft warning ultrasonic sensor) / ON or OFF
    		ON: Sound detected
    OFF: Sound not detected
    		Only displays "ON" on the Data List once. When checking again, disconnect and reconnect the GTS.
    Panic Function*6
    		This function operates the theft deterrent system when the panic switch is pressed and held for 0.8 seconds / ON or OFF
    		Customized value displayed
    		-
    Window Open Warning
    		This function is used to enable or disable the window open warning / ON or OFF
    		Customized value displayed
    		-
    Slide Roof Open Warning*2
    		This function is used to enable or disable the sliding roof open warning / ON or OFF
    		Customized value displayed
    		-
    Intrusion Win Opened*1
    		Setting of the customized item "Intrusion Win Opened" / ON or OFF
    		Customized value displayed
    		-
    Security control with mechanism key*4
    		Setting of the customized item "Security control with mechanism key"/ ON or OFF
    		Customized value displayed
    		-
    Intrusion Sensor Sound Detection Function*1, *3
    		Setting of the customized item "Intrusion Sensor Sound Detection Function" / ON or OFF
    		Customized value displayed
    		-
    Intrusion Sensor Sensitivity Level*1, *3
    		Setting of the customized item "Intrusion Sensor Sensitivity Level" /Low or Normal
    		Customized value displayed
    		-
    The Number of DTC
    		Number of DTCs / 0 to 255
    		Number of DTCs will be displayed
    		-

    1. *1: w/ Intrusion Sensor
    2. *2: w/ Sliding Roof System
    3. *3: w/o Door Ajar Warning Buzzer Function
    4. *4: Vehicles displaying the item "Security control with mechanism key" on the GTS
    5. *5: w/ Glass Breakage Sensor
    6. *6: w/ Panic Switch
    NOTICE:
    *7: Perform the intrusion sensor operation inspection with the GTS disconnected (Click here).

ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.

  1. Connect the GTS to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the GTS on.

  4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.

  5. According to the display on the GTS, perform the Active Test.

    Main Body
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Security Horn2*1
    		Theft warning siren
    		OFF/ON
    		-
    Vehicle Horn
    		Vehicle horns
    		OFF/ON
    		-
    Security Horn*3
    		Security horn
    		OFF/ON
    		-
    Power for Intrusion sensor*2
    		Intrusion sensor power supply
    		OFF/ON
    		-
    Power for Tilt sensor*2
    		Tilt sensor power supply
    		OFF/ON
    		-

    1. *1: w/ Theft Warning Siren Assembly
    2. *2: w/ Intrusion Sensor
    3. *3: w/ Security Horn Assembly

    Entry & Start
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Immobiliser Indicator
    		Security indicator light
    		OFF/ON
    		-