Fuel Pressure Regulator Installation

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Gr-Fe Fuel. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

  2. CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

  3. INSTALL INTAKE AIR SURGE TANK

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  5. INSPECT FOR FUEL LEAK

Fuel Pressure Regulator -- Installation



1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Gr-Fe Fuel.Fuel System.Fuel Pressure Regulator Installation

  1. Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure regulator.

    Text in Illustration
    *1
    		New O-Ring

  1. Install the fuel pressure regulator with the 2 bolts.

    Torque:
    9.0 N*m{92 kgf*cm, 80 in.*lbf}

  1. Connect the vacuum hose.



2. CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY

  1. Connect the No. 2 fuel pipe sub-assembly (Click here).



3. INSTALL INTAKE AIR SURGE TANK
(Click here)


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


5. INSPECT FOR FUEL LEAK

  1. Make sure that there are no fuel leaks after performing maintenance on the fuel system.

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON and turn the GTS on.

      NOTICE:
      Do not start the engine.

    3. Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the Fuel Pump / Speed.

    4. Check that there are no leaks from the fuel system.
      If there are fuel leaks, repair or replace parts as necessary.

    5. Turn the ignition switch off.

    6. Disconnect the GTS from the DLC3.