Glow Plug Removal

Engine Hybrid System. Land Cruiser. Urj200, 202 Grj200 Vdj200
1Vd-Ftv Starting. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE INTERCOOLER ASSEMBLY (w/ Intercooler)

  4. REMOVE INJECTION PIPES

  5. REMOVE NO. 1 GLOW PLUG CONNECTOR

  6. REMOVE GLOW PLUG ASSEMBLY

Glow Plug -- Removal


NOTICE:
  1. When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.
  2. w/ DPF
    When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines.


1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE INTERCOOLER ASSEMBLY (w/ Intercooler)
(Click here)


4. REMOVE INJECTION PIPES
(Click here)


5. REMOVE NO. 1 GLOW PLUG CONNECTOR

  1. Remove the 2 screw grommets and 2 nuts, and disconnect the 2 wire harnesses.



    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Glow Plug Removal

  1. Remove the 8 screw grommets, 8 nuts and 2 glow plug connectors.

    Text in Illustration
    *a
    		RH
    *b
    		LH


6. REMOVE GLOW PLUG ASSEMBLY


    Land Cruiser. Urj200, 202 Grj200 Vdj200.1Vd-Ftv Starting.Starting System.Glow Plug Removal

  1. Using a 10 mm deep socket wrench, remove the 8 glow plugs.

    Text in Illustration
    *a
    		RH
    *b
    		LH
    HINT:
    Before removing the glow plugs, thoroughly clean off all dirt, sand, etc.