Front Brake Removal

Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200
Brake (Front). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. REMOVE FRONT WHEEL

  2. DRAIN BRAKE FLUID

  3. REMOVE FRONT DISC BRAKE PAD

  4. DISCONNECT FRONT FLEXIBLE HOSE

  5. REMOVE DISC BRAKE CALIPER ASSEMBLY LH

  6. REMOVE FRONT DISC

Front Brake -- Removal


HINT:
  1. Use the same procedures for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. REMOVE FRONT WHEEL


2. DRAIN BRAKE FLUID
NOTICE:
Wash brake fluid off immediately if it is spilled on any painted surface.


3. REMOVE FRONT DISC BRAKE PAD


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the pin hold clip.

    NOTICE:
    The pin hold clip can be reused if it has sufficient rebound; no deformation or wear; and has had all rust, dirt and foreign particles cleaned off.

  1. Remove the 2 hole pins.



    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the front disc brake anti-rattle spring.

    NOTICE:
    The anti-rattle spring can be reused if it has sufficient rebound; no deformation, cracks or wear; and has had all rust, dirt and foreign particles cleaned off.


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 pads from the disc brake caliper.

  1. Remove the No. 1 anti-squeal shims from each pad.



4. DISCONNECT FRONT FLEXIBLE HOSE


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the union bolt and gasket, and then disconnect the flexible hose.



5. REMOVE DISC BRAKE CALIPER ASSEMBLY LH


    Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. Remove the 2 bolts and disc brake caliper from the knuckle.



6. REMOVE FRONT DISC


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake (Front).Front Brake.Front Brake Removal

  1. Put matchmarks on the front disc and axle hub if planning to reuse the disc.

  1. Remove the front disc.