Door Control Transmitter (W/O Entry And Start System) Installation

Install a new transmitter battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

NOTICE:

1. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.
   
2. Be careful not to bend the transmitter battery electrode during insertion.
   
3. Keep the transmitter battery cover interior free of dust and oil.
   

Attach the 7 claws and install the transmitter battery cover.

Install the door control transmitter module into the transmitter housing case.

Install the transmitter housing cover to the transmitter housing case.

Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.