Variable Gear Ratio Steering System Steering Angle Differs Between Left And Right

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Variable Gear Ratio Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200

INSPECTION PROCEDURE

CHECK FOR DTC

CHECK STEERING WHEEL CENTER POSITION

CHECK STEERING MISALIGNMENT

VARIABLE GEAR RATIO STEERING SYSTEM - Steering Angle Differs between Left and Right


INSPECTION PROCEDURE

NOTICE:
When replacing the steering actuator assembly, perform actuator angle neutral point calibration and initialization after replacement (Click here).
1.CHECK FOR DTC

  1. Check for DTCs (Click here).

    Result
    Result
    		Proceed to
    DTC is not output
    		A
    DTC is output
    		B



B
GO TO DIAGNOSTIC TROUBLE CODE CHART (Click here)
A


2.CHECK STEERING WHEEL CENTER POSITION

  1. Check the neutral position of the steering wheel.

    Result
    Result
    		Proceed to
    Steering wheel is centered
    		A
    Steering wheel is off-center
    		B



B
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
A


3.CHECK STEERING MISALIGNMENT

  1. Position the tires straight ahead.

  1. Turn the engine switch off.

  1. Disconnect the steering actuator assembly connector.

  1. Start the engine, turn the steering wheel from lock to lock and check the left and right steering angle.

    OK:
    No steering angle difference between left and right.
    HINT:
    When the vehicle is driven with the steering actuator assembly connector disconnected, DTC C15A5/65 is stored. After performing the inspection, clear DTCs (Click here).


NG
CHECK AND REPAIR OR REPLACE STEERING-RELATED PARTS (STEERING GEAR, STEERING COLUMN, ETC.)
OK

REPLACE STEERING ACTUATOR ASSEMBLY (Click here)