Power Tilt And Power Telescopic Steering Column System Freeze Frame Data

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Steering Column. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. FREEZE FRAME DATA

Power Tilt And Power Telescopic Steering Column System -- Freeze Frame Data



FREEZE FRAME DATA
NOTICE:
  1. Freeze frame data values will vary depending on the measurement conditions, surroundings, or vehicle conditions. For this reason, there may be a problem even when the values are within specifications.
  2. Turn the engine switch on (IG) and park the vehicle on level ground. Check the freeze frame data by using the GTS.

  1. Turn the engine switch off.

  2. Connect the GTS to the DLC3.

  3. Turn the engine switch on (IG).

  4. Turn the GTS on.

  5. Check the freeze frame data. Enter the following menus: Body Electrical / Tilt & Telescopic / Trouble Codes.

    Tilt & Telescopic
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Tilt Position
    		Current tilt position data/
    Min.: 0
    Max.: 65535
    		28672 to 36864
    		-
    Telesco Position
    		Current telescopic position data/
    Min.: 0
    Max.: 65535
    		28672 to 36864
    		-
    Tilt Return Position
    		Memorized tilt return position data/
    Min.: 0
    Max.: 65535
    		28672 to 36864
    		-
    Telesco Return Position
    		Memorized telescopic return position data/
    Min.: 0
    Max.: 65535
    		28672 to 36864
    		-
    Tilt Up Switch
    		Input state of tilt up switch/
    ON or OFF
    		ON: Tilt up switch activated
    OFF: Tilt up switch not activated
    		-
    Tilt Up SW (CAN)
    		Input state of tilt up switch/
    ON or OFF
    		-
    		-
    Tilt Down Switch
    		Input state of tilt down switch/
    ON or OFF
    		ON: Tilt down switch activated
    OFF: Tilt down switch not activated
    		-
    Tilt Down SW (CAN)
    		Input state of tilt down switch/
    ON or OFF
    		-
    		-
    Telesco Short Switch
    		Input state of telescopic contract switch/
    ON or OFF
    		ON: Telescopic contract switch activated
    OFF: Telescopic contract switch not activated
    		-
    Telesco Short SW (CAN)
    		Input state of telescopic contract switch/
    ON or OFF
    		-
    		-
    Telesco Long Switch
    		Input state of telescopic extend switch/
    ON or OFF
    		ON: Telescopic extend switch activated
    OFF: Telescopic extend switch not activated
    		-
    Telesco Long SW (CAN)
    		Input state of telescopic extend switch/
    ON or OFF
    		-
    		-
    T&T Manual SW Data
    		Voltage data of tilt and telescopic switch/
    Min.: 0.00 V
    Max.: 4.99 V
    		Neutral position: Below 0.2 V
    Tilt up: 1.67 to 2.13 V
    Tilt down: 0.54 to 0.74 V
    Telescopic contract: 1.08 to 1.40 V
    Telescopic extend: 2.22 to 2.77 V
    		-
    Power Source Voltage
    		Voltage data of power supply/
    Min.: 0.00 V
    Max.: 19.99 V
    		11 to 14 V
    		-
    Freeze Speed Info
    		Vehicle speed data/
    Min.: 0 km/h (0 mph)
    Max.: 255 km/h (158 mph)
    		Actual vehicle speed
    		-
    IG Switch (CAN)
    		Communication state of engine switch/
    ON or OFF
    		ON: Communication normal
    OFF: Communication interrupted
    		-
    IG Switch
    		Input state of engine switch/
    ON or OFF
    		ON: Input signal normal
    OFF: Input signal interrupted
    		-
    Receive from Meter
    		Communication state of combination meter assembly signal/
    OK or Interpt
    		OK: Communication normal
    Interpt: Communication interrupted
    		-
    Receive from Seat ECU
    		Communication state of position control ECU signal/
    OK or Interpt
    		OK: Communication normal
    Interpt: Communication interrupted
    		-
    Receive from Combi
    		Communication state of combination switch ECU signal/
    OK or Interpt
    		-
    		-
    J/B
    		Communication state of main body ECU (multiplex network body ECU) signal/
    OK or Interpt
    		OK: Communication normal
    Interpt: Communication interrupted
    		-
    Handle Position
    		Steering wheel position signal/
    Away or Return
    		Away: Steering wheel in away position
    Return: Steering wheel in return position
    		-
    The Number of DTCs
    		Number of stored DTCs/
    Min.: 0
    Max.: 255
    		0
    		-