Power Tilt And Power Telescopic Steering Column System How To Proceed With Troubleshooting

Steering. Land Cruiser. Urj200, 202 Grj200 Vdj200
Steering Column. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. INSPECT BATTERY VOLTAGE

  4. CHECK CAN COMMUNICATION SYSTEM*

  5. CHECK FOR DTCs*

  6. PROBLEM SYMPTOMS TABLE

  7. OVERALL ANALYSIS AND TROUBLESHOOTING*

  8. REPAIR OR REPLACE

  9. CONFIRMATION TEST

Power Tilt And Power Telescopic Steering Column System -- How To Proceed With Troubleshooting


HINT:
*: Use the GTS.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

    1. Confirm the problem symptoms (Click here).


    NEXT


    3.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    4.CHECK CAN COMMUNICATION SYSTEM*

    1. Use the GTS to check if the CAN communication system is functioning normally.

      1. CAN communication system (for LHD with central gateway ECU) (Click here).
      2. CAN communication system (for LHD without central gateway ECU) (Click here).
      3. CAN communication system (for RHD with central gateway ECU) (Click here).
      4. CAN communication system (for RHD without central gateway ECU) (Click here).
      Result
      Result
      		Proceed to
      CAN DTC is not output.
      		A
      CAN DTC is output (for LHD with central gateway ECU).
      		B
      CAN DTC is output (for LHD without central gateway ECU).
      		C
      CAN DTC is output (for RHD with central gateway ECU).
      		D
      CAN DTC is output (for RHD without central gateway ECU).
      		E


    		B.
    GO TO CAN COMMUNICATION SYSTEM (for LHD with Central Gateway ECU) (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

    		C.
    GO TO CAN COMMUNICATION SYSTEM (for LHD without Central Gateway ECU) (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

    		D.
    GO TO CAN COMMUNICATION SYSTEM (for RHD with Central Gateway ECU) (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)

    		E.
    GO TO CAN COMMUNICATION SYSTEM (for RHD without Central Gateway ECU) (HOW TO PROCEED WITH TROUBLESHOOTING) (Click here)
    A


    5.CHECK FOR DTCs*

    1. Check for DTCs (Click here).

      Result
      Result
      		Proceed to
      DTC is not output.
      		A
      DTC is output.
      		B



    		B.
    GO TO DIAGNOSTIC TROUBLE CODE CHART (Click here)
    A


    6.PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table (Click here).

      Result
      Result
      		Proceed to
      Problem symptom does not occur.
      		A
      Problem symptom occurs.
      		B



    		B.
    Go to step 8
    A


    7.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Data List / Active Test (Click here).

    2. Terminals of ECU (Click here).


    NEXT


    8.REPAIR OR REPLACE

      NEXT


      9.CONFIRMATION TEST

        NEXT

        END