Entry And Start System (For Entry Function) Entry Interior Alarm Does Not Sound
DESCRIPTION
INSPECTION PROCEDURE
CHECK ENTRY LOCK OPERATION
ENTRY AND START SYSTEM (for Entry Function) - Entry Interior Alarm does not Sound |
DESCRIPTION
The entry and start system (for Entry Function) uses the buzzer in the combination meter assembly (meter ECU) to perform various vehicle interior warnings. When the conditions of each warning are met, the certification ECU (smart key ECU assembly) sends a buzzer activation request signal to the combination meter assembly via CAN communication and the buzzer sounds.
INSPECTION PROCEDURE
- NOTICE:
- The entry and start system (for Entry Function) uses the LIN communication system and CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the entry and start system (for Entry Function) after confirming that the communication systems are functioning properly (Click here).
- When using the GTS with the engine switch off, connect the GTS to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins. Then select Model Code "KEY REGIST" under manual mode and enter the following menus: Body Electrical / Entry&Start(CAN). While using the GTS, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the GTS and the vehicle.
- After repair, confirm that no DTCs are output by performing "DTC Output Confirmation Operation" (Click here).
| 1.CHECK ENTRY LOCK OPERATION |
Check that the entry lock and unlock functions operate (Click here).
ResultResult
| Proceed to
|
Entry function operates normally
| A
|
Entry function does not operate normally
| B
|