Entry And Start System (For Entry Function) Data List / Active Test

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. READ DATA LIST

  1. PERFORM ACTIVE TEST

Entry And Start System (For Entry Function) -- Data List / Active Test



READ DATA LIST
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / (desired system) / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Entry & Start
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Power Save Cnt 10 Min.
    		Power save counter - 10 minutes / Min: 0, Max: 225
    		Within range from 0 to 225
    		-
    Power Save Cnt 9 Days
    		Power save counter - 9 days / Min: 0, Max: 225
    		Within range from 0 to 225
    		-
    Power Save Cnt 14 Days
    		Power save counter - 14 days / Min: 0, Max: 225
    		Within range from 0 to 225
    		-
    Power Save Cnt 30 Days
    		Power save counter - 30 days / Min: 0, Max: 225
    		Within range from 0 to 225
    		-
    Unmatched Vehicle-ID
    		No communication condition between vehicle and electrical key transmitter (vehicle-ID) / Yes or No
    		Yes: Key ID code not matched to vehicle
    No: Key ID code matched to vehicle
    		-
    No Response
    		No communication condition between vehicle and electrical key transmitter (response) / Yes or No
    		Yes: Key ID code not matched to vehicle
    No: Key ID code matched to vehicle
    		-
    Unmatch Code or Form
    		No communication condition between vehicle and electrical key transmitter (response code and format) / Yes or No
    		Yes: Key ID code not matched to vehicle
    No: Key ID code matched to vehicle
    		-
    Key Low Battery
    		Key low battery / Yes or No
    		Yes: Key battery voltage low
    No: Key battery voltage normal
    		-
    ID Code Difference(Resp)
    		No communication condition between vehicle and electrical key transmitter (ID code) / Yes or No
    		Yes: Key ID code not matched to vehicle
    No: Key ID code matched to vehicle
    		-
    C Code Difference
    		No communication condition between vehicle and electrical key transmitter (challenge code) / Yes or No
    		Yes: Key ID code not matched to vehicle
    No: Key ID code matched to vehicle
    		-
    Door Unlock Mode
    		Door unlock mode / All, Each, D_Door, Side
    		Mode status displayed
    		-
    Auto Entry Cancel SW
    		Entry door lock function cancel / ON or OFF
    		Mode status displayed
    		-
    Trunk Open Mode
    		Luggage compartment door open mode with vehicle locked / ON or OFF
    		Customization status displayed
    		-
    Ignition Available Area
    		Ignition available area / Front or All
    		Customization status displayed
    		-
    D-Door Touch Sensor
    		Driver side door touch sensor / ON or OFF
    		ON: Driver side door sensor touched
    OFF: Driver side door sensor not touched
    		-
    D-Door Trigger Switch
    		Driver side door outside handle lock switch / ON or OFF
    		ON: Driver side door outside handle lock switch pushed
    OFF: Driver side door outside handle lock switch not pushed
    		-
    P-Door Touch Sensor
    		Front passenger side door touch sensor / ON or OFF
    		ON: Front passenger side door sensor touched
    OFF: Front passenger side door sensor not touched
    		-
    P-Door Trigger Switch
    		Front passenger side door outside handle lock switch / ON or OFF
    		ON: Front passenger side door outside handle lock switch pushed
    OFF: Front passenger side door outside handle lock switch not pushed
    		-
    Dr-Door Touch Sensor*
    		Driver side rear door touch sensor / ON or OFF
    		ON: Driver side rear door sensor touched
    OFF: Driver side rear door sensor not touched
    		-
    Dr-Door Trigger Switch*
    		Driver side rear door outside handle lock switch / ON or OFF
    		ON: Driver side rear door outside handle lock switch pushed
    OFF: Driver side rear door outside handle lock switch not pushed
    		-
    Pr-Door Touch Sensor*
    		Passenger side rear door touch sensor / ON or OFF
    		ON: Passenger side rear door sensor touched
    OFF: Passenger side rear door sensor not touched
    		-
    Pr-Door Trigger Switch*
    		Passenger side rear door outside handle lock switch / ON or OFF
    		ON: Passenger side rear door outside handle lock switch pushed
    OFF: Passenger side rear door outside handle lock switch not pushed
    		-
    Tr/B-Door Lock SW
    		Back door lock switch / ON or OFF
    		ON: Back door lock switch pushed
    OFF: Back door lock switch not pushed
    		-

    HINT:
    *: For vehicles with entry function for rear doors.

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    IG SW
    		Engine switch on (IG) / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    ACC SW
    		Engine switch on (ACC) / ON or OFF
    		ON: Engine switch on (ACC)
    OFF: Engine switch off
    		-
    D Door Courtesy SW
    		Driver side door courtesy light switch signal / ON or OFF
    		ON: Driver side door opened
    OFF: Driver side door closed
    		-
    P Door Courtesy SW
    		Front passenger side door courtesy light switch signal / ON or OFF
    		ON: Front passenger side door opened
    OFF: Front passenger side door closed
    		-
    RL Door Courtesy SW
    		Rear LH side door courtesy light switch signal / ON or OFF
    		ON: Rear side door LH opened
    OFF: Rear side door LH closed
    		-
    RR Door Courtesy SW
    		Rear RH side door courtesy light switch signal / ON or OFF
    		ON: Rear side door RH opened
    OFF: Rear side door RH closed
    		-
    D Door Lock Position SW
    		Driver side door lock position switch signal / ON or OFF
    		ON: Driver side door unlocked
    OFF: Driver side door locked
    		-
    P Door Lock Position SW
    		Front passenger side door lock position switch signal / ON or OFF
    		ON: Front passenger side door unlocked
    OFF: Front passenger side door locked
    		-
    DR Door Lock Position SW
    		Driver side rear door lock position switch signal / ON or OFF
    		ON: Driver side rear door unlocked
    OFF: Driver side rear door locked
    		-
    PR Door Lock Position SW
    		Passenger side rear door lock position switch signal / ON or OFF
    		ON: Passenger side rear door unlocked
    OFF: Passenger side rear door locked
    		-
    Back Door Handle SW
    		Back door opener switch / ON or OFF
    		ON: Back door opener switch pushed
    OFF: Back door opener switch not pushed
    		-
    Back Door Courtesy SW
    		Back door courtesy light switch signal / ON or OFF
    		ON: Back door opened
    OFF: Back door closed
    		-

    Back Door (w/ Power Back Door System)
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Door Lock Status
    		Back door lock status signal / ON or OFF
    		ON: Back door unlocked
    OFF: Back door locked
    		-

PERFORM ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Entry & Start / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Entry & Start
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Overhead Tuner Power Supply ON
    		Door control receiver
    		ON or OFF
    		-
    D-Seat Outside Transmitter
    		Door electrical key oscillator (for Driver Side)
    		ON or OFF
    		-
    P-Seat Outside Transmitter
    		Door electrical key oscillator (for Front Passenger Side)
    		ON or OFF
    		-
    DR-Seat Outside Transmitter*
    		Door electrical key oscillator (for Driver Side Rear)
    		ON or OFF
    		-
    PR-Seat Outside Transmitter*
    		Door electrical key oscillator (for Passenger Side Rear)
    		ON or OFF
    		-
    Fr-Seat Inside Transmitter
    		Indoor electrical key antenna (for Front Floor)
    		ON or OFF
    		-
    Rr-Seat Inside Transmitter
    		Indoor electrical key antenna (for Rear 1 Floor)
    		ON or OFF
    		-
    Inside Trunk/Backdoor Transmitter
    		Indoor electrical key antenna (for Rear 2 Floor)
    		ON or OFF
    		-
    Outside Trunk/Backdoor Transmitter
    		Back door electrical key antenna (for Outer)
    		ON or OFF
    		-
    D-Seat Select
    		Driver side select
    		ON or OFF
    		-
    P-Seat Select
    		Front passenger side select
    		ON or OFF
    		-
    Dr-Seat Select*
    		Driver side rear select
    		ON or OFF
    		-
    Pr-Seat Select*
    		Passenger side rear select
    		ON or OFF
    		-
    Wireless Buzzer Operation
    		Wireless buzzer
    		ON or OFF
    		-

    HINT:
    *: For vehicles with entry function for rear doors.