Theft Deterrent System (W/O Entry And Start System) Data List / Active Test

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DATA LIST

  1. ACTIVE TEST

Theft Deterrent System (W/O Entry And Start System) -- Data List / Active Test



DATA LIST
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. According to the display on the intelligent tester, read the "Data List".

    Main Body
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Key Unlock Warning SW
    		Unlock warning switch / ON or OFF
    		ON: Key inserted into ignition key cylinder
    OFF: Key not inserted into ignition key cylinder
    		-
    D Door Courtesy SW
    		Driver side door courtesy light switch signal / ON or OFF
    		ON: Driver side door opened
    OFF: Driver side door closed
    		-
    D Door Lock Pos SW
    		Driver side door lock position switch signal / ON or OFF
    		ON: Driver side door unlocked
    OFF: Driver side door locked
    		-
    Door Key SW-Lock
    		Door key linked lock switch signal / ON or OFF
    		ON: Driver side door key cylinder turned to lock position
    OFF: Driver side door key cylinder not turned
    		-
    D-Door Key SW-UL
    		Door key linked unlock switch signal / ON or OFF
    		ON: Driver side door key cylinder turned to unlock position
    OFF: Driver side door key cylinder not turned
    		-
    P-Door Courtesy SW
    		Front passenger side door courtesy light switch signal / ON or OFF
    		ON: Front passenger side door opened
    OFF: Front passenger side door closed
    		-
    P-Door Lock Pos SW
    		Front passenger side door lock position switch signal / ON or OFF
    		ON: Front passenger side door unlocked
    OFF: Front passenger side door locked
    		-
    Door Lock SW-Lock
    		Door manual lock switch signal / ON or OFF
    		ON: Front passenger side door control switch on (in lock position)
    OFF: Front passenger side door control switch off
    		-
    Door Unlock SW-Unlock
    		Door manual unlock switch signal / ON or OFF
    		ON: Front passenger side door control switch on (in unlock position)
    OFF: Front passenger side door control switch off
    		-
    RL Door Courtesy SW
    		Rear LH side door courtesy light switch signal / ON or OFF
    		ON: Rear LH side door opened
    OFF: Rear LH side door closed
    		-
    RL-Door Lock Pos SW
    		Rear LH side door lock position switch signal / ON or OFF
    		ON: Rear LH side door unlocked
    OFF: Rear LH side door locked
    		-
    RR Door Courtesy SW
    		Rear RH side door courtesy light switch signal / ON or OFF
    		ON: Rear RH side door opened
    OFF: Rear RH side door closed
    		-
    RR-Door Lock Pos SW
    		Rear RH side door lock position switch signal / ON or OFF
    		ON: Rear RH side door unlocked
    OFF: Rear RH side door locked
    		-
    Back Door Courtesy SW
    		Back door courtesy light switch signal / ON or OFF
    		ON: Back door open
    OFF: Back door closed
    		-
    Back Door Lock Pos SW
    		Back door lock position switch signal / ON or OFF
    		ON: Back door unlocked
    OFF: Back door locked
    		-
    Hood Courtesy Switch
    		Engine hood courtesy switch /
    ON or OFF
    		ON: Engine hood open
    OFF: Engine hood closed
    		-
    IG SW
    		Ignition switch ON /
    ON / OFF
    		ON: Ignition switch ON
    OFF: Ignition switch off
    		-
    ACC SW
    		Ignition switch ACC /
    ON / OFF
    		ON: Ignition switch ACC
    OFF: Ignition switch off
    		-


ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Active Test.

  5. According to the display on the intelligent tester, perform the "Active Test".

    Main Body
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Security Indicator
    		Security indicator
    		ON / OFF
    		-
    Security Horn
    		Security horn
    		ON / OFF
    		-
    Vehicle Horn
    		Vehicle horn
    		ON / OFF
    		-