Theft Deterrent System (W/O Entry And Start System) How To Proceed With Troubleshooting

Vehicle Interior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Theft Deterrent Keyless Entry. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. PROBLEM SYMPTOMS TABLE

  4. OVERALL ANALYSIS AND TROUBLESHOOTING*

  5. REPAIR OR REPLACE

  6. CONFIRMATION TEST

Theft Deterrent System (W/O Entry And Start System) -- How To Proceed With Troubleshooting


HINT:
  1. Use these procedures to troubleshoot the theft deterrent system.
  2. *: Use the intelligent tester.
  3. Troubleshooting of the theft deterrent system is based on the premise that the door lock control system, wireless door lock control system, lighting system, horn system and engine immobiliser system are operating normally. Check these systems first before troubleshooting the theft deterrent system.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table (Click here).

      Result
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B



    		B.
    Go to step 5
    A


    4.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Data List / Active Test (Click here).

    2. Terminals of ECU (Click here).

    3. Operation Check (Click here).

    4. Inspection.


    NEXT


    5.REPAIR OR REPLACE

      NEXT


      6.CONFIRMATION TEST

        NEXT

        END