Sliding Roof System Data List / Active Test

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Sliding Roof Convertible. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. DATA LIST

  1. ACTIVE TEST

Sliding Roof System -- Data List / Active Test



DATA LIST
HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Sliding Roof / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Sliding Roof
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    Open Switch
    		Sliding roof switch open signal/ON or OFF
    		ON: OPEN switch is pressed
    OFF: OPEN switch is not pressed
    		-
    Close Switch
    		Sliding roof switch close signal/ON or OFF
    		ON: CLOSE switch is pressed
    OFF: CLOSE switch is not pressed
    		-
    Up Switch
    		Sliding roof switch tilt up signal/ON or OFF
    		ON: UP switch is pressed
    OFF: UP switch is not pressed
    		-
    Down Switch
    		Sliding roof switch tilt down signal/ON or OFF
    		ON: DOWN switch is pressed
    OFF: DOWN switch is not pressed
    		-
    Hall IC1 Status
    		Sliding roof operation signal/Normal or Lock
    		Normal: Sliding roof motor is operating
    Lock: Sliding roof motor is not operating
    		-
    Hall IC1 Pulse
    		Sliding roof operation signal/Lo or Hi
    		Lo: Sliding roof motor is not operating
    Hi: Sliding roof motor is operating
    		-
    Hall IC2 Status
    		Sliding roof operation signal/Normal or Lock
    		Normal: Sliding roof motor is operating
    Lock: Sliding roof motor is not operating
    		-
    Hall IC2 Pulse
    		Sliding roof operation signal/Lo or Hi
    		Lo: Sliding roof motor is not operating
    Hi: Sliding roof motor is operating
    		-
    Door Courtesy
    		Driver door courtesy light switch signal/ON or OFF
    		ON: Driver door is open
    OFF: Driver door is closed
    		-
    Ignition (MPX)
    		Engine switch signal (MPX signal)/ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    Ignition (Direct Signal)
    		Engine switch signal/ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    Door Handle Lock Button
    		Entry lock switch/ON or OFF
    		ON: Entry lock switch is pressed
    OFF: Entry lock switch is not pressed
    		-
    Door Key Close Operation
    		Key-linked sliding roof close signal/ON or OFF
    		ON: Driver door key cylinder is turned to lock position using key
    OFF: Driver door key cylinder is not turned
    		-
    Door Key Open Operation
    		Key-linked sliding roof open signal/ON or OFF
    		ON: Driver door key cylinder is turned to unlock position using key
    OFF: Driver door key cylinder is not turned
    		-
    Wireless Open Operation
    		Wireless sliding roof open signal/ON or OFF
    		ON: Transmitter unlock switch is pressed
    OFF: Transmitter unlock switch is not pressed
    		-
    Wireless Close Operation
    		Wireless sliding roof close signal/ON or OFF
    		ON: Transmitter lock switch is pressed
    OFF: Transmitter lock switch is not pressed
    		-
    Key Off Permission
    		Key-off operation permit signal/ON or OFF
    		ON: Driver door is not closed within 45 sec. after engine switch is turned OFF
    OFF: Any status except "ON" status
    		-
    Door Key Related (Open)*
    		Key-linked sliding roof open operation status/Avail or Not Avail
    		Avail: Key-linked sliding roof open operation is available
    Not Avail: Key-linked sliding roof open operation is not available
    		-
    Door Key Related (Close)*
    		Key-linked sliding roof close operation status/Avail or Not Avail
    		Avail: Key-linked sliding roof close operation is available
    Not Avail: Key-linked sliding roof close operation is not available
    		-
    Wireless Key Rel (Open)*
    		Transmitter-linked sliding roof open operation status/Avail or Not Avail
    		Avail: Transmitter-linked sliding roof open operation is available
    Not Avail: Transmitter-linked sliding roof open operation is not available
    		-
    Wireless Key Rel (Close)*
    		Transmitter-linked sliding roof close operation status/Avail or Not Avail
    		Avail: Transmitter-linked sliding roof close operation is available
    Not Avail: Transmitter-linked sliding roof close operation is not available
    		-
    Door Handle Button Close*
    		Entry lock switch-linked sliding roof close operation status/Avail or Not Avail
    		Avail: Entry lock switch-linked sliding roof close operation is available
    Not Avail: Entry lock switch-linked sliding roof close operation is not available
    		-
    Door Key Related Operation*
    		Direction for key-linked operation/Tilt or Slide
    		Tilt: Key-linked sliding roof operation operates tilt up or down
    Slide: Key-linked sliding roof operation operates slide open or close
    		-
    Wireless Key Rel Operation*
    		Direction for Transmitter-linked operation/Tilt or Slide
    		Tilt: Transmitter-linked sliding roof operation operates tilt up
    Slide: Key-linked sliding roof operation operates slide open
    		-
    Down Switch Failure(Current)
    		Down switch failure signal (Current)/Fail or Not Fail
    		Fail: Sliding roof tilt down signal failure (Current)
    Not Fail: Sliding roof tilt down signal not fail (Current)
    		-
    Up Switch Failure(Current)
    		Up switch failure signal (Current)/Fail or Not Fail
    		Fail: Sliding roof tilt up signal failure (Current)
    Not Fail: Sliding roof tilt up signal not fail (Current)
    		-
    Close Switch Failure(Current)
    		Close switch failure signal (Current)/Fail or Not Fail
    		Fail: Sliding roof close signal failure (Current)
    Not Fail: Sliding roof close signal not fail (Current)
    		-
    Open Switch Failure(Current)
    		Open switch failure signal (Current)/Fail or Not Fail
    		Fail: Sliding roof open signal failure (Current)
    Not Fail: Sliding roof open signal not fail (Current)
    		-
    Down Switch Failure(Past)
    		Down switch failure signal (Past)/Fail or Not Fail
    		Fail: Sliding roof tilt down signal failure (Past)
    Not Fail: Sliding roof tilt down signal not fail (Past)
    		-
    Up Switch Failure(Past)
    		Up switch failure signal (Past)/Fail or Not Fail
    		Fail: Sliding roof tilt up signal failure (Past)
    Not Fail: Sliding roof tilt up signal not fail (Past)
    		-
    Close Switch Failure(Past)
    		Close switch failure signal (Past)/Fail or Not Fail
    		Fail: Sliding roof close signal failure (Past)
    Not Fail: Sliding roof close signal not fail (Past)
    		-
    Open Switch Failure(Past)
    		Open switch failure signal (Past)/Fail or Not Fail
    		Fail: Sliding roof open signal failure (Past)
    Not Fail: Sliding roof open signal not fail (Past)
    		-
    Number of Trouble Codes
    		Number of trouble codes / Min.: 0, Max.: 255
    		Number of DTCs will be displayed
    		-

    HINT:
    *: w/ Remote Function

ACTIVE TEST
HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Sliding Roof / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Sliding Roof
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Slide Roof
    		Operate sliding roof SLIDE CLOSE/TILT UP
    		Clos/Up: Sliding roof SLIDE CLOSE or TILT UP operation occurs
    OFF: Sliding roof is not operating
    		Be careful to avoid injuries as this test causes vehicle parts to move.
    Slide Roof
    		Operate sliding roof SLIDE OPEN/TILT DOWN
    		Open/Dwn: Sliding roof SLIDE OPEN or TILT DOWN operation occurs
    OFF: Sliding roof is not operating
    		Be careful to avoid injuries as this test causes vehicle parts to move.