Power Mirror Control System (W/ Retract Mirror) How To Proceed With Troubleshooting

Vehicle Exterior. Land Cruiser. Urj200, 202 Grj200 Vdj200
Mirror (Ext). Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. VEHICLE BROUGHT TO WORKSHOP

  2. INSPECT BATTERY VOLTAGE

  3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

  4. PROBLEM SYMPTOMS TABLE

  5. OVERALL ANALYSIS AND TROUBLESHOOTING*

  6. ADJUST, REPAIR OR REPLACE

  7. CONFIRMATION TEST

Power Mirror Control System (W/ Retract Mirror) -- How To Proceed With Troubleshooting


HINT:
  1. Use the following procedures to troubleshoot the power mirror control system.
  2. *: Use the GTS.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE
      Standard voltage:
      11 to 14 V
      If the voltage is below 11 V, recharge or replace the battery before proceeding.

    NEXT


    3.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

    1. Use the GTS to check if the CAN communication system is functioning normally.

      Result:
      Result
      		Proceed to
      CAN DTC is not output
      		A
      CAN DTC is output (for LHD w/ Central Gateway ECU)
      		B
      CAN DTC is output (for LHD w/o Central Gateway ECU)
      		C
      CAN DTC is output (for RHD w/ Central Gateway ECU)
      		D
      CAN DTC is output (for RHD w/o Central Gateway ECU)
      		E



    		B.
    Go to CAN COMMUNICATION SYSTEM (Click here)

    		C.
    Go to CAN COMMUNICATION SYSTEM (Click here)

    		D.
    Go to CAN COMMUNICATION SYSTEM (Click here)

    		E.
    Go to CAN COMMUNICATION SYSTEM (Click here)
    A


    4.PROBLEM SYMPTOMS TABLE

    1. Refer to the problem symptoms table (Click here).

      Result:
      Result
      		Proceed to
      Fault is not listed in problem symptoms table
      		A
      Fault is listed in problem symptoms table
      		B



    		B.
    Go to step 6
    A


    5.OVERALL ANALYSIS AND TROUBLESHOOTING*

    1. Operation Check (Click here)

    2. Terminals of ECU (Click here)

    3. Data List / Active Test (Click here)


    NEXT


    6.ADJUST, REPAIR OR REPLACE

      NEXT


      7.CONFIRMATION TEST

        NEXT

        END