Yaw Rate And Deceleration Sensor (W/ Vsc) Removal

Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200
Brake Control Dynamic Control Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)

  4. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)

  5. REMOVE YAW RATE SENSOR

Yaw Rate And Deceleration Sensor (W/ Vsc) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)
(Click here)


4. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
(Click here)


5. REMOVE YAW RATE SENSOR


  1. Disconnect the sensor connector, and then detach the clamp from the sensor bracket.


    Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake Control Dynamic Control Systems.Anti-Lock Brake System.Yaw Rate And Deceleration Sensor (W/ Vsc) Removal



    Land Cruiser. Urj200, 202 Grj200 Vdj200.Brake Control Dynamic Control Systems.Anti-Lock Brake System.Yaw Rate And Deceleration Sensor (W/ Vsc) Removal

  1. Remove the 2 bolts and sensor.