Brake. Land Cruiser. Urj200, 202 Grj200 Vdj200
Brake Control Dynamic Control Systems. Land Cruiser. Urj200, 202 Grj200 Vdj200
Deceleration Sensor (W/ Abs) -- Removal |
| 1. PRECAUTION |
- NOTICE:
- After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3. REMOVE LOWER CONSOLE BOX (w/o Console Box Lid) |
| 4. REMOVE COOLING BOX ASSEMBLY (w/ Cool Box) |
| 5. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box) |
| 6. REMOVE DECELERATION SENSOR (for Automatic Transmission) |
Disconnect the sensor connector, and then detach the clamp from the sensor bracket.
Remove the 2 bolts and sensor.
| 7. REMOVE DECELERATION SENSOR (for Manual Transmission) |
Disconnect the sensor connector, and then detach the clamp from the sensor bracket.
Remove the 2 bolts and sensor.
