Audio And Visual System (W/ Navigation System) Voice Is Not Recognized

INSPECTION PROCEDURE

CHECK CONDITION

CHECK MICROPHONE (OPERATION CHECK)

REPLACE HARD DISC

INSPECTION PROCEDURE

1. Refer to the owner's manual and follow its instructions to check that the voice recognition level of the system is not too low for a particular voice.
   

   Result

   Result	Proceed to
   System voice recognition level is low with any voice.	A
   System voice recognition level is low only for a particular voice.	B

   HINT:

   System voice recognition level varies depending on voice and pronunciation. This is not a malfunction.

1. Enter the "Microphone&Voice Recognition Check" screen. Refer to Check Mic & Voice Recognition in Operation Check (Click here).
   

2. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.
   

3. Select the recording switch and perform voice recording.
   

   1. Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.
      
   2. Voice can be recorded up to 5 seconds.
      

4. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.
   

   OK:

   All check results are normal.
   

1. Replace the hard disc (Click here).
   

2. Check that voice recognition is normal.
   

   OK:

   Voice can be recognized normally.