Vehicle Interior. Yaris. Ncp93, 131
Heating Air Conditioning. Yaris. Ncp93, 131
Refrigerant Line (For Sedan) -- Installation |
| 1. INSTALL PIPING CLAMP |
Install a new piping clamp onto the suction hose.
Text in Illustration *1 Piping Clamp *2 Groove *3 Suction Hose - NOTICE:
- Securely engage the inside step of the piping clamp in the suction hose groove.
 |
Remove the vinyl tape from the open ends of the suction tube and suction hose.
Thoroughly coat a new O-ring and the contact surface of the suction hose with compressor oil (ND-OIL8).
Install the 2 O-rings onto the suction hose.
- NOTICE:
- Do not let foreign matter adhere to the O-ring or O-ring seal.
Engage the suction tube and suction hose by matching the alignment marks.
Text in Illustration *1 Large Diameter Section of Piping Clamp *2 Alignment Mark *3 Alignment Mark (yellow) - NOTICE:
- Insert them by holding the pipe, not the piping clamp.
 |
Securely insert the piping clamp to the point where the large diameter section of the piping clamp is covered by the suction tube.
Text in Illustration *1 Large Diameter Section of Piping Clamp - HINT:
- When inserting, make sure that a click sound is heard.
- Check that the suction tube is securely inserted by pulling it.
 |