Accelerator Pedal (For Hatchback) On-Vehicle Inspection

Engine Hybrid System. Yaris. Ncp93, 131
1Nz-Fe Engine Control. Yaris. Ncp93, 131

  1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

Accelerator Pedal (For Hatchback) -- On-Vehicle Inspection



1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY

  1. Connect the Techstream to the DLC3.

  1. Turn the ignition switch to ON.

  1. Turn the Techstream on.

  1. Enter the following menus: Powertrain / Engine and ECT / Data List / Accel Sensor Out No. 1 and Accel Sensor Out No. 2.

  1. Read the values displayed on the Techstream.

    Standard Voltage:
    Tester Display
    		Condition
    		Specified Condition
    Accel Sensor Out No. 1
    		Accelerator pedal is released
    		0.5 to 1.1 V
    Accelerator pedal is fully depressed
    		2.6 to 4.5 V
    Accel Sensor Out No.2
    		Accelerator pedal is released
    		1.2 to 2.0 V
    Accelerator pedal is fully depressed
    		3.4 to 4.7 V
    If the result is not as specified, check the accelerator pedal sensor assembly, wire harness or ECM.