Vehicle Exterior. Yaris. Ncp93, 131
Lighting (Ext). Yaris. Ncp93, 131
Lighting System (For Hatchback) -- Terminals Of Ecu |
CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU |

*A | Main Body ECU 1 Connector Type | - | - |
*1 | Instrument Panel Junction Block Assembly | *2 | Main Body ECU |

*A | Main Body ECU 2 Connector Type | - | - |
*1 | Instrument Panel Junction Block Assembly | *2 | Main Body ECU |
Remove the main body ECU.
Measure the voltage and resistance according to the value(s) in the table below.
If the result is not as specified, there may be a malfunction in the wire harness.Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition MB-11 (GND1) - Body ground - Ground Always Below 1 Ω MB-29 (ACC) - Body ground - Ignition power supply (ACC signal) Ignition switch ACC 11 to 14 V MB-30 (BECU) - Body ground - Battery power supply Always 11 to 14 V MB-32 (IG) - Body ground - Ignition power supply (IG signal) Ignition switch ON 11 to 14 V Reinstall the main body ECU.
Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition D143-5 (HU) - Body ground*1 P - Body ground Dimmer switch high signal Dimmer switch in high position Below 1 V Dimmer switch in low position Pulse generation D143-8 (HF) - Body ground*1 P - Body ground Dimmer switch high flash signal Dimmer switch in high flash position Below 1 V Dimmer switch not in high flash position Pulse generation D143-13 (CANL) - Body ground W - Body ground CAN communication Ignition switch ON Pulse generation D143-14 (CANH) - Body ground R - Body ground CAN communication Ignition switch ON Pulse generation D143-27 (FFOG) - Body ground*1*2 G - Body ground Fog light switch signal Fog light switch on Below 1 V Fog light switch off Pulse generation D143-29 (HEAD) - Body ground*1 L - Body ground Light control switch head signal Light control switch in head position Below 1 V Light control switch not in head position Pulse generation D143-30 (TAIL) - Body ground)*1 SB - Body ground Light control switch tail signal Light control switch in tail or head position Below 1 V Light control switch in neither tail nor head position Pulse generation 3A-28 (PKB) - Body ground R - Body ground Parking brake switch input Parking brake switch ON and ignition switch ON Below 1 V Parking brake switch off and ignition switch ON 11 to 14 V 3C-18 (HRLY) - Body ground*1 V - Body ground Headlight relay drive output Light control switch in head Below 1 V Light control switch not in head 11 to 14 V 3C-22 (DRL) - Body ground*3 G - Body ground Daytime running light system drive output Daytime running light system operates Below 1 V Daytime running light system does not operate 11 to 14 V 3C-35 (DIM) - Body ground*1 P - Body ground Dimmer relay drive output Dimmer switch in high or high flash position Below 1 V Dimmer switch in low position 11 to 14 V - *1: w/ Daytime Running Light System or w/ Theft Deterrent System
- *2: w/ Fog Light
- *3: w/ Daytime Running Light System
- HINT:
- If the result is not as specified, the main body ECU or instrument panel junction block assembly may have a malfunction.
- *1: w/ Daytime Running Light System or w/ Theft Deterrent System
CHECK COMBINATION METER ASSEMBLY |

Disconnect the D101 combination meter assembly connector.
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition D101-1 (B) - Body ground R - Body ground Battery power supply Always 11 to 14 V - HINT:
- If the result is not as specified, there may be a malfunction on the wire harness.
Reconnect the combination meter assembly connector.
Measure the voltage according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition D101-3 (HAZ) - Body ground L - Body ground Hazard warning signal switch signal Hazard warning signal switch off 11 to 14 V Hazard warning signal switch on Below 1 V D101-7 (LR) - Body ground V - Body ground Turn signal light RH drive output Turn signal light RH turned on 11 to 14 V Turn signal light RH turned off Below 1 V D101-9 (ER) - Body ground B - Body ground Turn signal switch RH signal Turn signal switch RH on Below 1 V Turn signal switch RH off 11 to 14 V D101-10 (EL) - Body ground Y - Body ground Turn signal switch LH signal Turn signal switch LH on Below 1 V Turn signal switch LH off 11 to 14 V D101-13 (LL) - Body ground LG - Body ground Turn signal light LH drive output Turn signal light LH turned on 11 to 14 V Turn signal light LH turned off Below 1 V - HINT:
- If the result is not as specified, the combination meter assembly may have a malfunction.