Dtc C2176/76 Receiver Error

Suspension. Yaris. Ncp93, 131
Tire Pressure Monitoring. Yaris. Ncp93, 131

DESCRIPTION

INSPECTION PROCEDURE

CLEAR DTC

CHECK FOR DTC

DTC C2176/76 Receiver Error


DESCRIPTION

This DTC is stored when, due to an ECU internal data error, data cannot be referenced.

DTC No.
DTC Detection Condition
Trouble Area
C2176/76
Malfunction in the tire pressure warning ECU internal circuit.
Tire pressure warning ECU

INSPECTION PROCEDURE

NOTICE:
  1. When replacing the tire pressure warning ECU, read the IDs stored in the old ECU using a Techstream and write them down before removal.
  2. It is necessary to perform registration (YARIS_NCP93 RM000000XN107JX.html) of the transmitter IDs into the tire pressure warning ECU after the ECU has been replaced.
1.CLEAR DTC

  1. Turn the ignition switch off.

  1. Connect a Techstream to the DLC3.

  1. Turn the ignition switch to ON and turn the Techstream on.

  1. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes /

  1. Clear the DTCs.


NEXT


2.CHECK FOR DTC
HINT:
After clearing DTCs, turn the ignition switch off and ON once.

  1. Turn the ignition switch off.

  1. Connect a Techstream to the DLC3.

  1. Turn the ignition switch to ON and turn the Techstream on.

  1. Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes /

  1. Check for DTCs.

    Result
    Result
    		Proceed to
    DTC C2176/76 is not output.
    		A
    DTC C2176/76 is output again.
    		B



B
REPLACE TIRE PRESSURE WARNING ECU (YARIS_NCP93 RM0000024T801VX.html)
A

USE SIMULATION METHOD TO CHECK (YARIS_NCP93 RM00000135202EX.html)