Tire Pressure Warning Receiver (For Sedan) Installation

Engage the clip and install the tire pressure warning receiver.

Install the bolt.

Torque:

7.5 N*m{76 kgf*cm, 66 in.*lbf}

Connect the tire pressure warning receiver connector.

w/ Curtain Shield Airbag:

1. Install a new special clip and the clip onto the roof side inner garnish.
   

2. Engage the 4 clips and the claw and install the roof side inner garnish.
   

w/o Curtain Shield Airbag:

1. Engage the 4 clips and the claw and install the roof side inner garnish.
   

Engage the 2 clips and the 4 claws and install the rear seat side cover.

Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.

Paint mark:

Area	Color
RH side	Green
LH side	Red

Engage the 7 claws and install the rear door scuff plate.

Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.

Torque:

37 N*m{375 kgf*cm, 27 ft.*lbf}

Install the rear seatback cover with the 2 clips.

Pull up the rear seatback.

Install the rear seat outer belt into the rear seat shoulder belt guide.

Install the rear center seat outer belt into the rear center seat shoulder belt guide.

Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.

Torque:

37 N*m{375 kgf*cm, 27 ft.*lbf}

Install the rear seatback cover with the 2 clips.

Pull up the rear seatback.

Install the rear seat outer belt into the rear seat shoulder belt guide.

Engage the 3 hooks and install the rear seatback.

Tighten the 3 bolts.

Torque:

7.9 N*m{80 kgf*cm, 70 in.*lbf}

Install the rear seat outer belt into the rear seat shoulder belt guide.

HINT:

Use the same procedure for both sides.

Install the rear center seat outer belt into the rear center seat shoulder belt guide.

Pass the rear seat inner belt through the rear seat cushion cover pad slit.

Engage the 3 hooks and install the rear seat cushion cover pad.

NOTICE:

Make sure that the 2 rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.