Back Door Support (For Hatchback) Installation

Vehicle Exterior. Yaris. Ncp93, 131
Door Hatch. Yaris. Ncp93, 131

  1. INSTALL BACK DOOR DAMPER STAY LOWER BRACKET

  2. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET

  3. INSTALL BACK DOOR STAY ASSEMBLY

Back Door Support (For Hatchback) -- Installation


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL BACK DOOR DAMPER STAY LOWER BRACKET

  1. Clean the threaded portion on the vehicle body with a non-residue solvent.

  1. Apply adhesive to the threads of the 2 bolts.

    Adhesive:
    Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

  1. Install the back door damper stay lower bracket with the 2 bolts.

    Torque:
    7.5 N*m{76 kgf*cm, 66 in.*lbf}


2. INSTALL BACK DOOR DAMPER STAY UPPER BRACKET

  1. Clean the threaded portion on the vehicle body with a non-residue solvent.

  1. Apply adhesive to the threads of the 2 bolts.

    Adhesive:
    Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

  1. Install the back door damper stay upper bracket with the 2 bolts.

    Torque:
    7.5 N*m{76 kgf*cm, 66 in.*lbf}


3. INSTALL BACK DOOR STAY ASSEMBLY


Yaris. Ncp93, 131
NOTICE:
  1. Avoid touching the stroke portions of the rod as much as possible to prevent foreign matter from attaching to the stroke portions. Be sure to hold the cylinders while servicing.
  2. Do not wear cotton gloves or other similar materials when handling the rod. Fibers may attach to the rod and result in gas leaks.
  3. Do not apply any load to the cylinders in the horizontal direction, in order to prevent the rod from being deformed.

  1. Install the back door stay on the 2 ball joints.

    NOTICE:
    Install the back door stay while supporting the back door by hand.

  1. Engage the 2 stop rings.