Upper Instrument Panel (For Hatchback) -- Reassembly |
| 1. INSTALL NO. 5 INSTRUMENT PANEL CUSHION |
Install a new instrument panel cushion as shown in the illustration.
 |
| 2. INSTALL INSTRUMENT PANEL CUSHION (for Lower Side) |
Install a new instrument panel cushion as shown in the illustration.
 |
| 3. INSTALL INSTRUMENT PANEL CUSHION (for Upper Side) |
Install a new instrument panel cushion as shown in the illustration.
 |
| 4. INSTALL NO. 3 INSTRUMENT PANEL CUSHION |
Install 2 new instrument panel cushions as shown in the illustration.
 |
| 5. INSTALL NO. 2 INSTRUMENT PANEL CUSHION |
Install a new instrument panel cushion as shown in the illustration.
 |
| 6. INSTALL NO. 1 INSTRUMENT PANEL CUSHION |
Install a new instrument panel cushion as shown in the illustration.
 |
| 7. INSTALL NO. 1 SIDE DEFROSTER NOZZLE |
Engage the guide and the 3 claws and install the defroster nozzle.
 |
| 8. INSTALL INSTRUMENT PANEL BOX |
Engage the 5 claws and install the instrument panel box.
 |
| 9. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY (for Driver Side) |
Engage the 3 claws and install the instrument panel register.
 |
| 10. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Engage the 4 clips and install the instrument cluster finish panel.
 |
| 11. INSTALL INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY |
Check that the ignition switch is off.
Check that the cable is disconnected from the negative (-) battery terminal.
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
Engage the 3 hooks B.
 |
Engage the 3 hooks A to install the instrument panel passenger airbag assembly.
Install the 2 screws
| 12. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY |
Engage the 3 guides and install the instrument panel register with the 3 <A> screws.
 |
| 13. INSTALL NO. 6 HEATER TO REGISTER DUCT ASSEMBLY |
Install the heater to register duct.
 |
| 14. INSTALL NO. 2 HEATER TO REGISTER DUCT |
Engage the 4 guides and install the heater to register duct with the 4 <A> screws.
 |
| 15. INSTALL NO. 1 HEATER TO REGISTER DUCT |
Engage the 4 guides and install the heater to register duct with the 4 <A> screws.
 |