REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY (w/ VSC)
REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY (w/ VSC)
REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY (w/o VSC)
Brake Master Cylinder (For Sedan) -- Disassembly |
| 1. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY (w/ VSC) |
| 2. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER (w/ VSC) |
| 3. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY (w/ VSC) |
 |
Fix the brake master cylinder in a vise between aluminum plates.
- NOTICE:
- Do not overtighten the vise.
Using a pin punch and a hammer, tap out the straight pin and remove the brake master cylinder reservoir.
| 4. REMOVE MASTER CYLINDER RESERVOIR GROMMET (w/ VSC) |
Remove the 2 grommets from the master cylinder reservoir.
| 5. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY (w/o VSC) |
 |
Fix the brake master cylinder sub-assembly in a vise between aluminum plates.
- NOTICE:
- Do not overtighten the vise.
Using a pin punch and hammer, tap out the straight pin.
Remove the master cylinder reservoir and 2 grommets.
Remove the filler cap and strainer from the master cylinder reservoir.
| 6. REMOVE BRAKE MASTER CYLINDER KIT (w/o VSC) |
 |
Push in the piston and remove the snap ring using snap ring pliers.
Push in the piston and remove the piston stopper bolt and gasket.
 |
Remove No. 1 piston from the master cylinder body by pulling it straight out.
- NOTICE:
- Do not scratch the inside of the cylinder body.
Tap the flanged part against wooden blocks until the end of No. 2 piston comes out. When the end of No. 2 piston comes out, pull No. 2 piston straight out of the master cylinder body.
- NOTICE:
- Do not scratch the inside of the cylinder body.
 |