REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)
REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)
REMOVE REAR SEATBACK CENTER HINGE SUB-ASSEMBLY (for 60/40 Split Seat Type)
Child Restraint Seat Anchor Bracket (For Hatchback 3 Door) -- Removal |
| 1. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) |
| 2. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) |
| 3. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type) |
| 4. REMOVE DECK BOARD ASSEMBLY |
Remove the deck board.
 |
| 5. REMOVE NO. 2 ROOM LIGHT ASSEMBLY |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw.
Text in Illustration *1 Protective Tape
 |
Disconnect the connector and remove the No. 2 room light assembly.
| 6. REMOVE JACK HANDLE (for RH Side) |
| 7. REMOVE REAR FLOOR FINISH PLATE |
Disengage the 4 claws and 4 guides and remove the rear floor finish plate.
 |
| 8. REMOVE FRONT DOOR SCUFF PLATE RH |
Disengage the 8 claws and remove the front door scuff plate.
 |
| 9. REMOVE FRONT DOOR SCUFF PLATE LH |
- HINT:
- Use the same procedure as for the RH side.
| 10. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
Remove the front door opening trim weatherstrip.
 |
| 11. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
- HINT:
- Use the same procedure as for the RH side.
| 12. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH |
Disengage the 2 claws and remove the anchor cover.
 |
Remove the bolt and separate the front seat outer belt.
 |
| 13. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side.
| 14. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH |
Disengage the 8 clips and 10 claws.
 |
Disengage the 3 guides and remove the quarter trim panel.
| 15. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side.
| 16. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH |
Remove the bolt.
 |
Disengage the 2 claws and separate the rear seat 3 point type outer belt.
| 17. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH |
- HINT:
- Use the same procedure as for the RH side.
| 18. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) |
Remove the 3 screws.
 |
Disengage the 3 clips and the 3 claws and remove the deck trim side panel.
| 19. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) |
- HINT:
- Use the same procedure as for the RH side.
| 20. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH |
Remove the 3 bolts and the child restraint seat anchor bracket sub-assembly LH.
 |
| 21. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH |
Remove the 3 bolts and the child restraint seat anchor bracket sub-assembly RH.
 |
| 22. REMOVE REAR SEATBACK CENTER HINGE SUB-ASSEMBLY (for 60/40 Split Seat Type) |
Remove the 2 bolts and the rear seatback center hinge sub-assembly.
 |