REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)
REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)
Rear Seat Outer Belt Assembly (For Hatchback 5 Door) -- Removal |
- HINT:
- The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.
1. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side) |
2. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side) |
3. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type) |
4. REMOVE DECK BOARD ASSEMBLY |
Remove the deck board.
![]() |
5. REMOVE NO. 2 ROOM LIGHT ASSEMBLY |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw.
Text in Illustration *1 Protective Tape
![]() |
Disconnect the connector and remove the No. 2 room light assembly.
6. REMOVE JACK HANDLE (for RH Side) |
7. REMOVE REAR FLOOR FINISH PLATE |
Disengage the 4 claws and 4 guides and remove the rear floor finish plate.
![]() |
8. REMOVE REAR DOOR SCUFF PLATE |
Disengage the 5 claws and guide and remove the rear door scuff plate.
![]() |
9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP |
Remove the rear door opening trim weatherstrip.
![]() |
10. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY |
Remove the bolt.
![]() |
Disengage the 2 claws and separate the rear seat 3 point type outer belt.
11. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) |
Remove the 3 screws.
![]() |
Disengage the 4 claws and the guide.
Disengage the 3 clips and remove the deck trim side panel.
12. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) |
- HINT:
- Use the same procedure as for the RH side.
13. REMOVE ROOF SIDE INNER GARNISH |
Disengage the 4 clips.
![]() |
Pass the rear seat 3 point type outer belt through the slit in the roof side inner garnish and remove the roof side inner garnish.
14. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY |
Remove the bolt and the shoulder anchor.
![]() |
Remove the bolt, disengage the 2 hooks to remove the rear seat 3 point type outer belt assembly.
![]() |
15. REMOVE SEAT BELT HOLE SEAL |
Disengage the 2 claws to remove the seat belt hole seal.
![]() |