Item
| Signal Description
|
TURN
| Receives turn signal from headlight dimmer switch assembly (Direct line).
|
BEAM
| Receives high beam signal from DIM relay (Direct line).
|
FRONT FOG*1
| Receives front fog light signal from FR FOG relay (Direct line).
|
BRAKE
| - Receives brake fluid level warning signal from brake level switch (Direct line).
- Receives parking brake switch signal from main body ECU (multiplex network body ECU) (CAN).
- Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN).
|
ABS
| Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN).
|
OIL PRESSURE
| Receives engine oil pressure warning signal from engine oil pressure switch (Direct line).
|
MIL
| Receives malfunction check engine warning signal from ECM (Direct line).
|
D + P BELT
| Receives driver seat belt warning signal (unfastened) from airbag sensor assembly (CAN).
|
AIRBAG
| Receives malfunction signal from airbag sensor assembly (CAN).
|
Engine coolant temperature HOT
| Receives engine coolant temperature signal from ECM (CAN).
|
Engine coolant temperature COOL
| Receives engine coolant temperature signal from ECM (CAN).
|
CHARGE
| Receives malfunction signal from generator (CAN).
|
DOOR
| Open door indicator illuminates when receiving signal from main body ECU (multiplex network body ECU) (CAN).
|
FUEL
| Receives fuel level signal from fuel sender gauge assembly (Direct line).
|
EPS
| Receives malfunction signal from power steering ECU (CAN).
|
VSC OFF*2
| Receives VSC off signal from brake actuator assembly (skid control ECU) (CAN).
|
SLIP*2
| Receives malfunction signal from brake actuator assembly (skid control ECU) (CAN).
|
TRAC OFF*2
| Receives TRC off signal from brake actuator assembly (skid control ECU) (CAN).
|
CRUISE*3
| Receives cruise indicator signal from ECM (CAN).
|
CRUISE SET*3
| Receives cruise indicator signal from ECM (CAN).
|
ECO*4
| Receives ecology light indicator signal from the ECM (CAN) and illuminates when the vehicle is being driven ECO-friendly.
|
TIRE PRESSURE
| Receives malfunction signal from tire pressure warning ECU (Direct line).
|
WASHER*5
| Receives washer level warning signal from washer level warning switch (Direct line).
|
MAINT REQD*6
| Calculates accumulated total vehicle travel distance.
|
P shift position indicator*7
| Receives a P signal from the ECM (CAN).
|
R shift position indicator*7
| Receives an R signal from the ECM (CAN).
|
N shift position indicator*7
| Receives an N signal from the ECM (CAN).
|
D shift position indicator*7
| Receives a D signal from the ECM (CAN). During oil level confirmation mode, receives an A/T oil temperature signal and indicates the A/T oil temperature by turning off / blinking / turning on the shift position D indicator.
|