Front Door Belt Moulding (For Sedan) Installation

Engage the 6 claws and install a new front door belt moulding.

Remove the protective tape.

Engage the claw and install the outer rear view mirror with the 3 nuts.

Torque:

8.0 N*m{82 kgf*cm, 71 in.*lbf}

w/ Power mirror:
Connect the connector.

w/ Power window:

1. Connect the front door lock remote control cable and front door inside locking cable.
   





2. Engage the 9 clips and install the front door trim board.
   





3. Tighten the screw.
   

w/o Power window:

1. Connect the front door lock remote control cable and front door inside locking cable.
   





2. Engage the 9 clips and install the front door trim board.
   





3. Tighten the screw.
   

for Driver side with power window:

1. Connect the connector.
   

2. Engage the 7 claws and 2 clips and install the front armrest base upper panel.
   

3. Tighten the screw.
   

for Front passenger side with power window:

1. Connect the connector.
   

2. Engage the 7 claws and 2 clips and install the front armrest base upper panel.
   

3. Tighten the screw.
   

w/o Power window:

1. Engage the 5 clips and 2 clips and install the front armrest base upper panel.
   

2. Tighten the screw.
   

Engage the claw and clip and install the front door lower frame bracket garnish.

Install the window regulator handle plate.

Open all the windows.

Install the front door window regulator handle with the clip at the angle shown in the illustration.