Starter (For Hatchback Except Cold Area Specification Vehicles) Removal

Engine Hybrid System. Yaris. Ncp93, 131
1Nz-Fe Starting. Yaris. Ncp93, 131

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE FLYWHEEL HOUSING SIDE COVER

  4. REMOVE STARTER ASSEMBLY

Starter (For Hatchback Except Cold Area Specification Vehicles) -- Removal



1. PRECAUTION
NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (YARIS_NCP93 RM00000482L007X.html).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE FLYWHEEL HOUSING SIDE COVER


    Yaris. Ncp93, 131

  1. Disengage the claw by pulling it outward and remove the flywheel housing side cover.



4. REMOVE STARTER ASSEMBLY


Yaris. Ncp93, 131.1Nz-Fe Starting.Starting System (For Sedan).Starter (For Hatchback Except Cold Area Specification Vehicles) Removal

  1. Open the terminal cap.

  1. Remove the nut and disconnect the terminal 30.

  1. Disconnect the connector.

  1. Remove the 2 bolts and the starter assembly.

    Text in Illustration
    *1
    		Terminal 30