Meter / Gauge System (For Sedan) Data List / Active Test

Vehicle Interior. Yaris. Ncp93, 131
Meter Gauge Display. Yaris. Ncp93, 131
  1. DATA LIST

  1. PERFORM ACTIVE TEST

Meter / Gauge System (For Sedan) -- Data List / Active Test



DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Combination Meter / Data List.

  5. According to the display on the Techstream, read the Data List.

    Combination Meter
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    +B Voltage
    Battery voltage
    Min=0
    Max=255
    Battery voltage 10V: 119
    Battery voltage 10.5V: 126
    Battery voltage 11V: 132
    Battery voltage 12V: 145
    Battery voltage 13V: 157
    Battery voltage 14V: 170
    -
    Tail Relay SW
    Taillight relay
    ON or OFF
    ON: Headlight dimmer switch (Light control switch) → TAIL
    OFF: Headlight dimmer switch (Light control switch) → OFF
    -
    Tail Cancel SW
    Taillight cancel switch
    ON or OFF
    ON: Taillight cancel switch is ON
    OFF: Taillight cancel switch is OFF
    -
    ODO/TRIP Change SW
    ODO/TRIP change switch
    ON or OFF
    ON: Switch is ON
    OFF: Switch is OFF
    -
    Timer SW on Combination Meter
    Timer switch on combination meter
    ON or OFF
    ON: Timer switch is ON
    OFF: Timer switch is OFF
    -
    P-Seatbelt Buckle SW
    Passenger seat belt buckle switch
    ON or OFF
    ON: Passenger seat belt is fastened
    OFF: Passenger seat belt is unfastened
    -
    Vehicle Speed Meter
    Vehicle speed
    Min.: 0 km/h (0 mph)
    Max.: 255 km/h (158 mph)
    Almost same as vehicle speed (When vehicle is driving)
    -
    Engine Rpm
    Engine speed
    Min.: 0 rpm
    Max.: 12750 rpm
    Approximately same as actual engine speed (When engine is running)
    -
    Coolant Temperature
    Engine coolant temperature
    Min.: 0°C (32°F)
    Max.: 127.5°C (261.5°F)
    After warming up:
    75 to 105°C (167 to 221°F)
    -
    Fuel Input (A/D)
    Fuel input signal
    Min.: 0
    Max.: 255
    Fuel receiver gauge segments
    No.1 to No.8 illuminate:
    14 to 34
    No.1 to (No.6, No.7) illuminate:
    77 to 109
    No.1 to (No.4, No,5) illuminate:
    135 to 172
    No.1 to No.2 illuminate:
    175 to 188
    No.1 flashes:
    194 to 200
    -
    Integrated value for Oil Maintenance*1
    Integrated value for Oil Maintenance
    Min.: 0 mile
    Max.: 25500 mile
    Total accumulated vehicle travel distance for oil maintenance since last reset
    -
    Rheostat value (A/D)
    Rheostat value
    Min.: 0
    Max.: 255
    Light control rheostat switch is Dark (0)→Bright (255)
    -
    Communication ECM/Meter DTC 1
    ECM communication stop history
    Rec or Unrec
    Displays DTC history
    -
    ECM ODO (History 1)
    ECM odometer history
    Min.: 0
    Max.: 999999
    With history : 0 to 999999
    Without history : FFFFFFh
    -
    Communication ECM/Meter DTC 2
    ECM communication stop history
    Rec or Unrec
    Displays DTC history
    -
    ECM ODO (History 2)
    ECM odometer history
    Min.: 0
    Max.: 999999
    With history : 0 to 999999
    Without history : FFFFFFh
    -
    Communication ECM/Meter DTC 3
    ECM communication stop history
    Rec or Unrec
    Displays DTC history
    -
    ECM ODO (History 3)
    ECM odometer history
    Min.: 0
    Max.: 999999
    With history : 0 to 999999
    Without history : FFFFFFh
    -
    Communication ABS/Meter DTC 1
    Skid control ECU communication stop history
    Rec or Unrec
    Displays DTC history
    -
    ABS/VSC ODO (History 1)
    Skid control ECU odometer history
    Min.: 0
    Max.: 999999
    With history : 0 to 999999
    Without history : FFFFFFh
    -
    Communication ABS/Meter DTC 2
    Skid control ECU communication stop history
    Rec or Unrec
    Displays DTC history
    -
    ABS/VSC ODO (History 2)
    Skid control ECU odometer history
    Min.: 0
    Max.: 999999
    With history : 0 to 999999
    Without history : FFFFFFh
    -
    Communication ABS/Meter DTC 3
    Skid control ECU communication stop history
    Rec or Unrec
    Displays DTC history
    -
    ABS/VSC ODO (History 3)
    Skid control ECU odometer history
    Min.: 0
    Max.: 999999
    With history : 0 to 999999
    Without history : FFFFFFh
    -
    Key Remind Sound
    Key remind sound
    FAST, NORMAL or SLOW
    Display key reminder buzzer speed setting
    -
    Seat-belt Warning Buzzer
    Front driver seat belt warning buzzer
    ON or OFF
    D/P ON: Driver and passenger buzzer ON
    D ON: Driver buzzer ON
    P ON: Passenger buzzer ON
    D/P OFF: Driver and passenger buzzer OFF
    -
    Number of Trouble Code
    The DTC number which is currently output
    -
    -

    1. *1: for U.S.A.

PERFORM ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the Techstream on.

  4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

  5. According to the display on the Techstream, perform the Active Test.

    Combination Meter
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Speed Meter Operation
    Speedometer
    0/40/80/120 mph
    0/40/80/120/160/200 km/h
    -
    Tachometer Operation
    Tachometer
    0/1000/2000/3000/4000/5000/ 6000/7000 rpm
    -
    Fuel Meter Operation
    Fuel gauge
    EMPTY: Segment No. 1 flashes.
    1/2: Segment No. 1 to No. 4 illuminates.
    FULL: Segment No. 1 to No. 8 illuminates.
    -
    Water Temperature Meter Operation
    Engine coolant temperature warning light and indicator light
    LOW: Engine coolant temperature indicator light illuminates.
    NORMAL: Both engine coolant temperature warning light and indicator light turn off.
    HIGH: Engine coolant temperature warning light flashes.
    -
    A/T Indicator Operation 1*1
    Shift indicator light
    P/R/N/D/3/2/L
    Vehicle is stopped and engine is idling
    Indicat. Lamp Airbag
    Airbag warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Front Passenger Side Seat Belt
    Passenger side seat belt warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Driver Side Seat Belt
    Driver side seat belt warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicat. Lamp ABS*2
    ABS warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicat. Lamp Charge
    Charge warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicat. Lamp Slip*3
    SLIP warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicat. Lamp Coolant Cool
    Engine coolant temperature indicator light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicat. Lamp Coolant Hot
    Engine coolant temperature warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicate. Lamp Cruise*4
    CRUISE indicator light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicat. Lamp Brake
    Brake warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicat. EPS
    EPS warning light
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicate. Oil Maintenance*5
    Oil maintenance indicator
    OFF/ON
    Vehicle is stopped and engine is idling
    Indicate. SET*4
    SET indicator
    OFF/ON
    Vehicle is stopped and engine is idling
    Meter Display 1
    Meter display
    ALL/0/1/2/3/4/5/6
    Vehicle is stopped and engine is idling
    Meter Display 2
    Meter display
    7/8/9
    Vehicle is stopped and engine is idling

    1. *1: for Automatic Transaxle
    2. *2: w/ ABS
    3. *3: w/ VSC
    4. *4: w/ Cruise Control
    5. *5: for U.S.A.