REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag)
REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag)
Brake Pedal (For Hatchback) -- Removal |
| 1. REMOVE COMBINATION METER ASSEMBLY |
| 2. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
Remove the 2 <A> screws.
 |
Disengage the claw and the guide and remove the instrument panel under cover.
| 3. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag) |
Disengage the 5 clips and the 2 claws and remove the instrument panel finish panel.
 |
| 4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL (w/o Knee Airbag) |
Disengage the 2 clips and the 5 claws and remove the instrument panel finish panel.
 |
| 5. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY (w/ Knee Airbag) |
| 6. REMOVE STOP LIGHT SWITCH ASSEMBLY |
 |
Disconnect the connector from the stop light switch assembly.
Disengage the harness clamp from the pedal support.
Turn the stop light switch counterclockwise and remove the stop light switch assembly.
 |
| 7. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS |
 |
Remove the brake pedal return spring.
Remove the clip and push rod pin and separate the push rod clevis from the brake pedal.
| 8. SEPARATE NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY |
 |
Place matchmarks on the No. 2 steering intermediate shaft assembly and steering column assembly.
Text in Illustration *a Matchmark
Loosen bolt A.
Remove bolt B and separate the No. 2 steering intermediate shaft assembly from the steering column assembly.
| 9. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY |
Remove the 4 nuts, bolt and the pedal support.
 |