Clutch Pedal Switch (For Hatchback) Installation

Install the No. 2 clutch start switch assembly to the clutch pedal support sub-assembly and temporarily tighten the lock nut.

HINT:

Tighten the lock nut to the specified torque when adjusting the clutch pedal.

Install the clutch start switch assembly to the clutch pedal support sub-assembly with the nut.

Torque:

16 N*m{160 kgf*cm, 12 ft.*lbf}

Connect the clutch start switch connector.

With the clutch pedal fully depressed, check that the clearance shown in the illustration is as specified.

Text in Illustration

*a	Clearance
	Fully depressed

Standard clearance:

2.1 to 5.1 mm (0.083 to 0.201 in.)

Engage the 5 claws and 2 clips and install the instrument panel finish panel.

Engage the 2 claws and 5 clips and install the instrument panel finish panel.

Engage the guide and the claw.

Install the instrument panel under cover with the 2 <A> screws.

Check that the engine does not start when the clutch pedal is released.

Check that the engine starts when the clutch pedal is fully depressed.
If necessary, replace the clutch start switch assembly.