Shift And Select Lever Shaft (For Sedan) Reassembly

Coat the shift and select lever shaft with MP grease, and install a snap ring onto the shift and select lever shaft using a brass bar and a hammer.

Coat select spring seat No. 1 with MP grease.

Using a pin punch (φ5 mm) and a hammer, install select spring seat No. 1, select return compression spring No. 1, the select inner lever and select inner lever slotted spring pin onto the shift and select lever.

Drive in depth:

3.0 to 4.0 mm (0.1181 to 0.1575 in)

Coat the shift inter lock plate and shift lever inner No. 1 with MP grease.

Using a pin punch (φ5 mm) and a hammer, install the shift inter lock plate, shift lever inner No. 1 and shift inner lever slotted spring pin onto the shift and select lever shaft.

Drive in depth:

-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

Coat shift lever inner No. 2 with MP grease.

Using a pin punch (φ5 mm) and a hammer, install shift lever inner No. 2 and shift inner lever slotted spring pin onto the shift and select lever shaft.

Drive in depth:

1.0 to 2.0 mm (0.0394 to 0.0787 in.)

Coat select spring seat No. 2 with MP grease.

Install select spring seat No. 2 and select return compression spring No. 2. Using pliers, install a new select spring seat No. 2 E-ring onto the shift and select lever shaft.