Name Plate (For Hatchback) Installation

Vehicle Exterior. Yaris. Ncp93, 131

Exterior Panels Trim. Yaris. Ncp93, 131

INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
INSTALL NO. 6 BACK DOOR NAME PLATE
INSTALL SYMBOL EMBLEM

Name Plate (For Hatchback) -- Installation

1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

Clean the attachment surface.
1. Using an infrared light, heat the double-sided tape remaining on the back door panel.
  Heating Temperature
  Item
  Temperature
  Vehicle Body
  40 to 60°C (104 to 140°F)
  CAUTION:
  Do not burn yourself on the hot body panel or with the infrared light.
  NOTICE:
  Do not heat the vehicle body excessively.
2. Using a piece of cloth, rub the double-sided tape off the back door panel while it is hot from the infrared light.
  NOTICE:
  Installing the No. 2 luggage compartment door name plate while any double-sided tape remains on the back door panel may cause adhesion failure. Therefore, completely remove the double-sided tape.
3. Using a non-residue solvent, clean the attachment surface.

Install a new No. 2 luggage compartment door name plate as shown in the illustration.

Installation Position:
Mark
Measurement (along surface)
*1
223.8 mm (8.81 in.)
*2
211.9 mm (8.34 in.)
*3
167.1 mm (6.58 in.)
NOTICE:
Install the No. 2 luggage compartment door name plate in an environment where the ambient temperature is over 20°C (68°F). If it is below 20°C (68°F), using an infrared light, heat the back door panel and the No. 2 luggage compartment door name plate to 20 to 30°C (68 to 86°F) and install the No. 2 luggage compartment door name plate.

2. INSTALL NO. 6 BACK DOOR NAME PLATE

Clean the attachment surface.
1. Using an infrared light, heat the double-sided tape remaining on the back door panel.
  Heating Temperature
  Item
  Temperature
  Vehicle Body
  40 to 60°C (104 to 140°F)
  CAUTION:
  Do not burn yourself on the hot body panel or with the infrared light.
  NOTICE:
  Do not heat the vehicle body excessively.
2. Using a piece of cloth, rub the double-sided tape off the back door panel while it is hot from the infrared light.
  NOTICE:
  Installing the No. 6 back door name plate while any double-sided tape remains on the back door panel may cause adhesion failure. Therefore, completely remove the double-sided tape.
3. Using a non-residue solvent, clean the attachment surface.

Install a new No. 6 back door name plate as shown in the illustration.

Installation Position:
Mark
Measurement (along surface)
*1
215.8 mm (8.50 in.)
*2
220.0 mm (8.66 in.)
*3
51.5 mm (2.03 in.)
NOTICE:
Install the No. 6 back door name plate in an environment where the ambient temperature is over 20°C (68°F). If it is below 20°C (68°F), using an infrared light, heat the back door panel and the No. 6 back door name plate to 20 to 30°C (68 to 86°F) and install the No. 6 back door name plate.

3. INSTALL SYMBOL EMBLEM

Clean the attachment surface.
1. Using an infrared light, heat the double-sided tape remaining on the back door panel.
  Heating Temperature
  Item
  Temperature
  Vehicle Body
  40 to 60°C (104 to 140°F)
  CAUTION:
  Do not burn yourself on the hot body panel or with the infrared light.
  NOTICE:
  Do not heat the vehicle body excessively.
2. Using a piece of cloth, rub the remaining double-sided tape off the back door panel while it is hot from the infrared light.
  NOTICE:
  Installing the symbol emblem with any double-sided tape remaining on the back door panel may cause adhesion failure. Therefore, completely remove the double-sided tape.
3. Using a non-residue solvent, clean the attachment surface.

Yaris. Ncp93, 131.Exterior Panels Trim.Front Bumper (For Sedan).Name Plate (For Hatchback) Installation

Insert the 2 pins into the back door panel and install a new symbol emblem.
Text in Illustration
*1
Location Pin
NOTICE:
Install the symbol emblem in an environment where the ambient temperature is over 20 °C (68°F). If it is below 20°C (68°F), using an infrared light, heat the back door panel and the symbol emblem to 20 to 30°C (68 to 86°F) and install the symbol emblem.