Back-Up Light Switch (For Hatchback) Removal

Disengage the clamp and disconnect the fuel vapor feed hose assembly from the No. 1 air cleaner hose.

Loosen the 2 hose clamps and disconnect the fuel vapor feed hose assembly from the No. 1 air cleaner hose and vacuum switching valve assembly.

Disconnect the No. 2 fuel vapor feed hose from the intake manifold.

Disengage the 2 clamps and disconnect the wire harness from the air cleaner cap sub-assembly and vacuum switching valve assembly.

Disconnect the mass air flow meter connector.

Disconnect the vacuum switching valve connector.

Loosen the hose clamp and disconnect the No. 1 air cleaner hose from the throttle with motor body assembly.

Disengage the 2 clamps and remove the air cleaner cap sub-assembly with No. 1 air cleaner hose.

Remove the air cleaner element.

Disengage the clamp and disconnect the wire harness from the air cleaner case.

Remove the 2 bolts and the air cleaner case from the air cleaner bracket.

Remove the clip A and washer, and then separate the control shift cable of transmission control cable assembly from the manual transaxle assembly.

Remove the clip B and separate the control shift cable of transmission control cable assembly from the shift control cable bracket.

Separate the 2 clamps and disconnect the back up light switch assembly connector.

Using SST, remove the back up light switch assembly from the manual transaxle assembly.

SST

09817-16011

Remove the gasket from the back up light switch assembly.