Power Window Control System (For Hatchback) Key-Off Operation Function Operates Even If Operating Conditions Are Not Satisfied

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK OPERATION FUNCTION AFTER IGNITION SWITCH IS TURNED OFF

READ VALUE USING TECHSTREAM

DESCRIPTION

1. When the front doors are closed, driver door power window regulator motor can control its power window operation for approximately 45 seconds after the ignition switch is turned from ON to off (the key is removed) by receiving operation permission signals from the main body ECU. However, when approximately 45 seconds have elapsed, or the driver door or front passenger door is opened within approximately 45 seconds of the ignition switch being turned off (the key is removed), the power window regulator motor stops operating.
   

WIRING DIAGRAM

INSPECTION PROCEDURE

1. Check the power window operation function after the ignition switch is turned off.
   
   

   Result

   Result	Proceed to
   When power window can still be operated even after opening driver door or front passenger door within approximately 45 seconds of ignition switch being turned off	A
   When power window can still be operated even after approximately 45 seconds have elapsed after ignition switch turned off	B

1. Connect the Techstream to the DLC3.
   

2. Turn the ignition switch to ON.
   

3. Turn the Techstream on.
   

4. Enter the following menus: Body Electrical / Main Body / Data List.
   

5. According to the display on the Techstream, read the Data List.
   
   

   Main Body

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   FR Door Courtesy	Front door courtesy light switch RH signal / ON or OFF	ON: Front door RH closed OFF: Front door RH opened	-
   FL Door Courtesy	Front door courtesy light switch LH signal / ON or OFF	ON: Front door LH closed OFF: Front door LH opened	-

   OK:

   Normal conditions listed above are displayed.