Steering Pad Switch (For Sedan) Installation

AudioVisualTelematics. Yaris. Ncp93, 131
Audio Video. Yaris. Ncp93, 131

  1. INSTALL STEERING PAD SWITCH LH

  2. INSTALL STEERING PAD ASSEMBLY

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. INSPECT SRS WARNING LIGHT

Steering Pad Switch (For Sedan) -- Installation


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (YARIS_NCP93 RM000000KT10D1X.html ).


1. INSTALL STEERING PAD SWITCH LH

  1. Engage the 2 claws and the pin.

  1. Install the steering pad switch LH with the screw.

  1. Connect the connector.



2. INSTALL STEERING PAD ASSEMBLY


Yaris. Ncp93, 131.Audio Video.Audio And Visual System (For Sedan).Steering Pad Switch (For Sedan) Installation
NOTICE:
Do not use a steering pad that has been dropped.

  1. Confirm that the ignition switch is turned to OFF.

  1. Confirm that the negative battery terminal is detached.

    CAUTION:
    Do not begin the operation for at least 90 seconds after the negative battery terminal is detached.

  1. Connect the horn terminal.

  1. Connect the airbag connector.

    NOTICE:
    1. Match the color of the airbag connector with that of the steering pad assembly, and install the airbag connector.
    2. Securely lock the locking button.


    Yaris. Ncp93, 131

  1. Install the steering pad.

  1. Using "Torx" socked wrench T30, tighten the 2 bolts.

    Torque:
    8.8 N*m{90 kgf*cm, 78 in.*lbf}
    NOTICE:
    Tighten the 2 bolts while holding the steering pad to prevent it moving upward.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque:
5.4 N*m{55 kgf*cm, 48 in.*lbf}


4. INSPECT SRS WARNING LIGHT
(YARIS_NCP93 RM000000XFD0CVX.html)