Power Window Control System (For Hatchback) Rear Power Window Rh Does Not Operate With Rear Power Window Switch Rh
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH
INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - P/W RELAY)
CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH)
CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY)
POWER WINDOW CONTROL SYSTEM (for Hatchback) - Rear Power Window RH does not Operate with Rear Power Window Switch RH |
DESCRIPTION
If the rear RH side manual UP / DOWN function does not operate, a malfunction may exist in the rear power window regulator motor assembly RH, rear power window regulator switch assembly RH, power window regulator master switch assembly or wire harness.
WIRING DIAGRAM
INSPECTION PROCEDURE
- NOTICE:
- Inspect the fuses for circuits related to this system before performing the following inspection procedure.
1.INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH |
Inspect the rear power window regulator switch assembly RH (YARIS_NCP93 RM000003EN0008X.html).
2.INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH |
Inspect the rear power window regulator motor assembly RH (YARIS_NCP93 RM000003EN4008X.html).
3.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - P/W RELAY) |
Disconnect the R1 rear power window regulator switch assembly RH connector.
Measure the voltage according to the value(s) in the table below.
- Standard Voltage:
Tester Connection
| Switch Condition
| Specified Condition
|
R1-3 (B) - Body ground
| Ignition switch ON
| 11 to 14 V
|
Text in Illustration*a
| Front view of wire harness connector (to Rear Power Window Regulator Switch Assembly RH)
|
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
4.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH) |
Disconnect the R1 rear power window regulator switch assembly RH connector.
Disconnect the R2 rear power window regulator motor assembly RH connector.
Measure the resistance according the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
R1-4 (U) - R2-1 (U)
| Always
| Below 1 Ω
|
R1-1 (D) - R2-2 (D)
| Always
| Below 1 Ω
|
R1-4 (U) - Body ground
| Always
| 10 kΩ or higher
|
R1-1 (D) - Body ground
| Always
| 10 kΩ or higher
|
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|
5.CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH - POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY) |
Disconnect the R1 rear power window regulator switch assembly RH connector.
Disconnect the G20 power window regulator master switch assembly connector.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
R1-5 (SU) - G20-10 (U)
| Always
| Below 1 Ω
|
R1-2 (SD) - G20-18 (D)
| Always
| Below 1 Ω
|
R1-5 (SU) - Body ground
| Always
| 10 kΩ or higher
|
R1-2 (SD) - Body ground
| Always
| 10 kΩ or higher
|
| REPAIR OR REPLACE HARNESS OR CONNECTOR |
|
|