Vehicle Interior. Yaris. Ncp93, 131
Door Lock. Yaris. Ncp93, 131
Power Door Lock Control System (For Hatchback) -- Data List / Active Test |
DATA LIST |
- HINT:
- Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Main Body / Data List.
According to the display on the Techstream, read the Data List.
Main Body Tester Display Measurement Item/Range Normal Condition Diagnostic Note Key Unlock Warning SW Unlock warning switch signal / OFF or ON OFF: No key is in ignition key cylinder
ON: Key is in ignition key cylinder- ACC SW Ignition switch status / OFF or ON OFF: Ignition switch off
ON: Ignition switch on (ACC)- IG SW Ignition switch status / OFF or ON OFF: Ignition switch off
ON: Ignition switch to ON- RR Door Courtesy SW*1 Rear door courtesy light switch LH and RH signal / OFF or ON OFF: Rear door LH and RH closed
ON: Rear door LH or RH opened- RL Door Courtesy SW*1 Rear door courtesy light switch LH and RH signal / OFF or ON OFF: Rear door LH and RH closed
ON: Rear door LH or RH opened- Back Door Courtesy SW Back door courtesy switch signal / OFF or ON OFF: Back door closed
ON: Back door opened- Back Door Open Back door open status / Prohibit or Permit Prohibit: Back door locked
Permit: Back door unlocked- Door Lock SW-Lock Door manual lock switch signal / OFF or ON OFF: Door control switch is turned to unlock position
ON: Door control switch is turned to lock position- Door Lock SW-Unlock Door manual unlock switch signal / OFF or ON OFF: Door control switch is turned to lock position
ON: Door control switch is turned to unlock position- Door Key SW-Lock Driver door and front passenger door lock and unlock switch signal / OFF or ON OFF: Driver door or front passenger door key cylinder not turned
ON: Driver door or front passenger door key cylinder turned to lock position- Door Key SW-Unlock Front passenger door lock and unlock switch signal / OFF or ON OFF: Front passenger door key cylinder not turned
ON: Front passenger door key cylinder turned to unlock position- D Door key SW-Unlock Driver door lock and unlock switch signal / OFF or ON OFF: Driver door key cylinder not turned
ON: Driver door key cylinder turned to lock position- FR Door Lock Pos Front door unlock detection switch RH signal / LOCK or UNLOCK LOCK: Front RH locked
UNLOCK: Front RH door unlocked- FR Door Courtesy Front RH door courtesy light switch signal / ON or OFF ON: Front RH door closed
OFF: Front RH door opened- FL Door Lock Pos Front door unlock detection switch LH signal / LOCK or UNLOCK LOCK: Front LH side door locked
UNLOCK: Front LH side door unlocked- FL Door Courtesy Front LH door courtesy light switch signal / ON or OFF ON: Front LH door closed
OFF: Front LH door opened- Back Door Open Handle SW Back door opener switch signal / OFF or ON OFF: Back door opener switch not pushed
ON: Back door opener switch pushed- RR-Door Lock Pos SW*1*2 Rear door unlock detection switch LH and RH signal / OFF or ON OFF: Rear door LH and RH locked
ON: Rear door LH or RH unlocked- RL-Door Lock Pos SW*1*2 Rear door unlock detection switch LH and RH signal / OFF or ON OFF: Rear door LH and RH locked
ON: Rear door LH or RH unlocked- Unlock key Twice Key-linked 2 step unlock function / OFF or ON Customized setting displayed - - *1: for 5 Door
- *2: w/ Theft Deterrent System
- *1: for 5 Door
ACTIVE TEST |
- HINT:
- Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Main Body / Active Test.
According to the display on the Techstream, perform the Active Test.
Main Body Tester Display Test Part Control Range Diagnostic Note Door Lock Door lock motor OFF / Unlock / Lock - D-Door Unlock Driver door lock motor OFF / ON - Trunk and Back-Door Open Back door lock motor OFF / ON -