Front Brake (For Hatchback) Removal
REMOVE FRONT WHEEL
DRAIN BRAKE FLUID
DISCONNECT FRONT FLEXIBLE HOSE
REMOVE DISC BRAKE CYLINDER ASSEMBLY
REMOVE FRONT DISC BRAKE PAD KIT
REMOVE FRONT ANTI SQUEAL SHIM KIT
REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE
REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN
REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSH
REMOVE FRONT DISC BRAKE BUSH DUST BOOT
REMOVE FRONT DISC BRAKE CYLINDER MOUNTING
REMOVE FRONT DISC
Front Brake (For Hatchback) -- Removal |
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with any painted surfaces.
3. DISCONNECT FRONT FLEXIBLE HOSE |
Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
4. REMOVE DISC BRAKE CYLINDER ASSEMBLY |
Hold the slide pin with a wrench, remove the 2 bolts and remove the disc brake cylinder.
5. REMOVE FRONT DISC BRAKE PAD KIT |
Remove the disc brake pad kit from the disc brake cylinder mounting.
6. REMOVE FRONT ANTI SQUEAL SHIM KIT |
Remove the No. 1 anti squeal shim and No. 2 anti squeal shim from each brake pad.
Text in Illustration*1
| Pad Wear Indicator Plate
|
*2
| No. 1 Anti Squeal Shim
|
*3
| No. 2 Anti Squeal Shim
|
*4
| Front Disc Brake Pad
|
Remove the pad wear indicator plate from each brake pad.
7. REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE |
Remove the 4 disc brake pad support plates from the disc brake cylinder mounting.
Text in Illustration*1
| No. 1 Front Disc Brake Pad Support Plate
|
*2
| No. 2 Front Disc Brake Pad Support Plate
|
- NOTICE:
- Each pad support plate has a different shape. Be sure to put an identification mark on each pad support plate so that they can be installed in their original position.
8. REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN |
Remove the slide pin (upper) and slide pin (lower) from the disc brake cylinder mounting.
Text in Illustration*1
| Slide Pin (Upper)
|
*2
| Slide Pin (Lower)
|
9. REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSH |
Using a screwdriver with its tip wrapped in protective tape, remove the slide bush from the slide pin (lower).
Text in Illustration*1
| Protective Tape
|
*2
| Slide Bush
|
*3
| Slide Pin (Lower)
|
- NOTICE:
- Be careful not to damage the slide pin.
10. REMOVE FRONT DISC BRAKE BUSH DUST BOOT |
Remove the 2 dust boots from the disc brake cylinder mounting.
11. REMOVE FRONT DISC BRAKE CYLINDER MOUNTING |
Remove the 2 bolts and disc brake cylinder mounting from the steering knuckle.
Place matchmarks on the disc and axle hub and remove the disc.
Text in Illustration*a
| Matchmark
|