Front Passenger Airbag Assembly (For Sedan) Disposal

Vehicle Interior. Yaris. Ncp93, 131
Supplemental Restraint Systems. Yaris. Ncp93, 131

  1. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)

  2. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)

Front Passenger Airbag Assembly (For Sedan) -- Disposal


HINT:
When scrapping a vehicle equipped with the SRS or disposing of an instrument panel passenger airbag, deploy the airbag first in accordance with the procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of the DISTRIBUTOR.
CAUTION:
  1. Never dispose of a front passenger airbag that has an undeployed airbag.
  2. The airbag emits an exploding sound when it is deployed, so perform the operation outdoors and where it will not create a nuisance to nearby residents.

  3. Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal
    When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from electrical noise.
  4. When deploying the airbag, perform the operation at least 10 m (33 ft) away from the front passenger airbag.
  5. The front passenger airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
  6. Use gloves and safety glasses when handling a front passenger airbag which has been deployed.
  7. Do not apply water, etc. to a front passenger airbag which has been deployed.
  8. Always wash your hands with water after completing the operation.


1. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE)
HINT:
Prepare a battery as the power source to deploy the airbag.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Check the function of SST.

    SST
    09082-00700
    CAUTION:
    Always use the specified SST (SRS Airbag Deployment Tool) when deploying the airbag.



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

    1. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.

    2. Press the SST activation switch, and check that the LED of the SST activation switch illuminates.

      CAUTION:
      1. Do not connect the SST connector (yellow colored one) to the airbag.
      2. If the LED illuminates when the activation switch is not being pressed, SST may be malfunctioning. Do not use SST.

    3. Disconnect SST from the battery.

  1. Disconnect the cable from the negative battery terminal.



    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Disengage the 2 claws and open the cover.



    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Disconnect the airbag connector, as shown in the illustration.

    NOTICE:
    Do not damage the airbag wire harness when handling the airbag connector.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Connect SST.

    1. Connect the SST connector to the front passenger airbag.

      SST
      09082-00700
      09082-00780
      NOTICE:
      Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness.


      2. Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

    2. Move SST to at least 10 m (33 ft) away from the vehicle.

    3. Close all doors and windows of the vehicle.

      NOTICE:
      Do not damage the SST wire harness.

    4. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.

  1. Deploy the airbag.

    1. Check that no one is inside the vehicle or within a 10 m (33 ft) radius of the vehicle.

    2. Press the SST activation switch and deploy the airbag.

      CAUTION:
      1. Make sure that no one is near the vehicle when deploying the airbag.
      2. The front passenger airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
      3. Use gloves and safety glasses when handling a front passenger airbag which has been deployed.
      4. Do not apply water, etc. to a front passenger airbag which has been deployed.
      5. Always wash your hands with water after completing the operation.
      HINT:
      The airbag is deployed as the LED of the SST activation switch illuminates.


2. DISPOSE OF FRONT PASSENGER AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE)
NOTICE:
  1. Never use the customer's vehicle to deploy the airbag when disposing of the front passenger airbag.
  2. Follow the procedure detailed below when deploying the airbag.
HINT:
Prepare a battery as the power source to deploy the airbag.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Check the function of SST.

    SST
    09082-00700
    CAUTION:
    Always use the specified SST (SRS Airbag Deployment Tool) when deploying the airbag.



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

    1. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.

    2. Press the SST activation switch, and check that the LED of the SST activation switch illuminates.

      CAUTION:
      1. Do not connect the SST connector (yellow colored one) to the airbag.
      2. If the LED illuminates when the activation switch is not being pressed, SST may be malfunctioning. Do not use SST.

    3. Disconnect SST from the battery.

  1. Remove the front passenger airbag (YARIS_NCP93 RM000001EEX042X.html).

    CAUTION:
    1. When removing the front passenger airbag, work must be started at least 90 seconds after the ignition switch is turned to OFF and the cable is disconnected from the negative battery terminal.
    2. When storing the front passenger airbag, keep the upper surface of the airbag deployment side facing upward.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Connect SST.

    SST
    09082-00802(09082-10801,09082-30801)
    NOTICE:
    Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Using a service-purpose wire harness for the vehicle, tie the front passenger airbag to the tire.

    Stripped wire harness section:
    Area
    		Measurement
    A
    		1.25 mm2 or more (0.0019 in.2 or more)
    CAUTION:
    Do not use wire harness that is too thin or any other object to tie the front passenger airbag because it may snap due to the shock when the airbag is deployed. Always use a wire harness for vehicle use with a cross section of at least 1.25 mm2 (0.0019 in.2).
    HINT:
    To calculate the area of the stripped wire harness cross section:
    Area = 3.14 x (Diameter)2 divided by 4



      Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

    1. Position the front passenger airbag inside the tire, as shown in the illustration.

      Tire size:
      Area
      		Measurement
      A
      		185 mm (7.28 in.)
      B
      		360 mm (14.17 in.)
      CAUTION:
      1. Make sure that the wire harnesses are tight. If there is any slack in the wire harnesses, the front passenger airbag may become loose due to the shock when the airbag is deployed.
      2. Always tie the front passenger airbag with the airbag deployment side facing inside the tire.
      NOTICE:
      The tire will be marked by the airbag deployment, so use a waste tire.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Place the tires.

    1. Place at least 2 tires under the tire to which the front passenger airbag is tied.

    2. Place at least 2 tires over the tire to which the front passenger airbag is tied. The disc wheel should be installed onto the top tire.

      NOTICE:
      Do not place the SST connector under the tire because it could be damaged.


      3. Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

    3. Tie the tires together with 2 wire harnesses.

      CAUTION:
      Make sure that the wire harnesses are tight. It is highly dangerous when a loose wire harness results in the tires coming free due to the shock when the airbag is deployed.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Connect SST.

    SST
    09082-00700
    NOTICE:
    Do not lock the secondary lock of the twin lock to avoid damaging the SST connector and wire harness. Also, secure some slack for SST wire harness inside the tire.

  1. Deploy the airbag.

    1. Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.

    2. Check that no one is within a 10 m (33 ft) radius of the tire to which the front passenger airbag is tied.

    3. Press the SST activation switch and deploy the airbag.

      CAUTION:
      Make sure that no one is near the tires when deploying the airbag.
      HINT:
      The airbag is deployed as the LED of the SST activation switch illuminates.


    Yaris. Ncp93, 131.Supplemental Restraint Systems.Airbag System (For Sedan).Front Passenger Airbag Assembly (For Sedan) Disposal

  1. Dispose of the front passenger airbag.

    CAUTION:
    1. The front passenger airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
    2. Use gloves and safety glasses when handling a front passenger airbag which has been deployed.
    3. Do not apply water, etc. to a front passenger airbag which has been deployed.
    4. Always wash your hands with water after completing the operation.

    1. Remove the front passenger airbag from the tire.

    2. Place the front passenger airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.