Navigation Antenna -- Installation |
| 1. INSTALL NAVIGATION ANTENNA ASSEMBLY |
Install the navigation antenna with the 2 screws.
 |
| 2. INSTALL NO. 3 HEATER TO REGISTER DUCT |
Install the duct with the 2 screws.
 |
| 3. INSTALL NO. 2 HEATER TO REGISTER DUCT |
Install the duct with the screw.
 |
| 4. INSTALL NO. 1 HEATER TO REGISTER DUCT |
Install the duct with the screw.
 |
| 5. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
Install the duct with the 3 screws.
 |
| 6. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
Install the duct with the 3 screws.
 |
| 7. INSTALL UPPER INSTRUMENT PANEL |
Attach the 6 clips and 5 claws to install the instrument panel.
Connect the connector and attach the clamp.
Install the 2 bolts and 2 screws.
Connect the passenger airbag connector.
Install the 2 bolts to the passenger airbag.
- Torque:
- 20 N*m{204 kgf*cm, 15 ft.*lbf}
 |
| 8. INSTALL FRONT PILLAR GARNISH RH |
for Short Body:
Install the front pillar garnish (RAV4_ACA30 RM000001XUR003X_01_0039.html).
for Long Body:
Install the front pillar garnish (RAV4_ACA30 RM000001XUX003X_01_0040.html).
| 9. INSTALL FRONT PILLAR GARNISH LH |
for Short Body:
Install the front pillar garnish (RAV4_ACA30 RM000001XUR003X_01_0048.html).
for Long Body:
Install the front pillar garnish (RAV4_ACA30 RM000001XUX003X_01_0041.html).
| 10. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
Attach the 2 hinges to install the door.
 |
Attach the claw to the glove compartment door stopper.
 |
While pushing in the sides of the glove compartment door in the direction indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.
| 11. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY CENTER |
 |
Attach the 5 clips to install the instrument panel register.
| 12. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET |
for HDD:
Install the navigation receiver assembly with bracket (RAV4_ACA30 RM0000021Q0003X.html).
for DVD:
Install the navigation receiver assembly with bracket (RAV4_ACA30 RM000003P8B001X.html).
| 13. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL CENTER |
 |
Connect the connector.
Attach the 3 clips and 2 claws to install the cluster finish panel.
| 14. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL CENTER |
 |
Connect the connector.
Attach the 3 clips and 2 claws to install the cluster finish panel.
| 15. INSTALL COMBINATION METER ASSEMBLY |
Connect the connector.
 |
Attach the 2 clips to install the combination meter.
Install the 2 screws.
| 16. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
Attach the 4 clips and 6 claws to install the instrument cluster finish panel.
 |
| 17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |