Engine Switch (W/ Entry And Start System) Inspection

Engine. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
3Zr-Fae Starting. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. INSPECT ENGINE SWITCH

Engine Switch (W/ Entry And Start System) -- Inspection



1. INSPECT ENGINE SWITCH


  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Switch Condition
    		Specified Condition
    7 (SS1) - 5 (GND)
    		Not pushed
    		10 kΩ or higher
    2 (SS2) - 5 (GND)
    		Not pushed
    		10 kΩ or higher
    7 (SS1) - 5 (GND)
    		Pushed
    		Below 1 Ω
    2 (SS2) - 5 (GND)
    		Pushed
    		Below 1 Ω


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.3Zr-Fae Starting.Starting System (W/ Entry And Start System).Engine Switch (W/ Entry And Start System) Inspection

    If the result is not as specified, replace the engine switch assembly.


  1. Apply battery voltage between the terminals of the switch, and check the illumination condition of the switch.

    OK:
    Measurement Condition
    		Specified Condition
    Battery positive (+) → Terminal 11 (SWIL)
    Battery negative (-) → Terminal 5 (GND)
    		Illuminates (illumination of lettering)
    Battery positive (+) → Terminal 12 (INDS)
    Battery negative (-) → Terminal 5 (GND)
    		Illuminates (green)
    Battery positive (+) → Terminal 13 (INDW)
    Battery negative (-) → Terminal 5 (GND)
    		Illuminates (amber)
    HINT:
    1. If the positive (+) lead and the negative (-) lead are incorrectly connected, the engine switch indicator will not illuminate.
    1. If the voltage is too low, the indicator will not illuminate.


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.3Zr-Fae Starting.Starting System (W/ Entry And Start System).Engine Switch (W/ Entry And Start System) Inspection

    If the result is not as specified, replace the engine switch assembly.