Front Axle Hub Bolt Replacement
Axle. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
REMOVE FRONT WHEEL
REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY LH
REMOVE FRONT DISC
REMOVE FRONT AXLE HUB BOLT
INSTALL FRONT AXLE HUB BOLT
INSTALL FRONT DISC
INSTALL FRONT DISC BRAKE CYLINDER ASSEMBLY LH
INSTALL FRONT WHEEL
Front Axle Hub Bolt -- Replacement |
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are the LH side.
2. REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY LH |
Remove the 2 bolts and cylinder.
Put matchmarks on the disc and axle hub.
Remove the disc.
4. REMOVE FRONT AXLE HUB BOLT |
Using SST, remove the hub bolt that needs to be replaced.
- SST
- 09650-17011
5. INSTALL FRONT AXLE HUB BOLT |
Insert a new hub bolt into the bolt hole. Set a plate washer and nut on the hub bolt end.
Using a brass bar or equivalent to hold the front axle, install the hub bolt by tightening the nut. Then remove the nut and plate washer.
Align the matchmarks and install the disc.
- HINT:
- When replacing the disc with a new one, select the installation position where the disc has the minimum runout.
7. INSTALL FRONT DISC BRAKE CYLINDER ASSEMBLY LH |
Install the cylinder with the 2 bolts.
- Torque:
- 34 N*m{350 kgf*cm, 25 ft.*lbf}
- Torque:
- 103 N*m{1050 kgf*cm, 76 ft.*lbf}